Installation Instructions

PX/QX/RX Version 4.30 Installation Manual – Issue C
- 35 -
Proximity Reader
Keypad Connections
Black
Red
Max. 150m
Blue
Orange
It is not recommended practice to share a
sensor connection and the data bus
connections in the same cable.
D1 D0
+ - A B
To Drive an LED directly from a
keypad connect either the brown
wire (Green LED) or the green wire
(Red LED) to the OP terminal of the
keypad. The keypad output can be
programmed for set, entry/exit or
any other output function.
The diagram shows a Guardall reader.
Other types of reader may be used.
Refer to the engineer programming
manual (System/card types) for details.