Installation Instructions

PX Version 5.0 - QX/RX Version 4.51 Installation Manual – Issue F
- 17 -
Technical Specification
Current Consumption
Product Current (mA)
RX16i/QX32i 80
PX48i/PX80i/PX250i 110
PX500/PX250HS 110
Keypad (standard) 28
Keypad with proximity 85
Mini keypad 80
Concentrator (8-input) 42
Concentrator (4-input) 25
3A Smart Concentrator 130
Output module 22 (all relays off)
Serial module 30
Access module 33
Proximity Reader 14
Data comms Module 60
GSM/Dual Comm module 60 (standby)
125 (transmitting, strong signal present)
180 (transmitting, weak signal present)
PSTN module 50
Speech module Standby-11
Playback-23
Record-32
Radio Module (Inovonics) 75
Radio Module (Visonic) 52
Technical Specification
Battery Standby
The following example shows the average system current (excluding sensors) for a typical system at
a supply voltage of 14 volts.
Product RX16i/
QX32i
PX48i/
PX80i/
PX250i
PX500/
PX250HS
Panel 80 110 110
1 Keypad 28 28 28
1 Concentrator 42 42 42
Total (mA) 150 180 180
The table below shows the available auxiliary current for various battery sizes using the above typical
system current.