Installation Instructions

PX Version 5.0 - QX/RX Version 4.51 Installation Manual – Issue F
- 41 -
PSTN/GSM/Dual Comms module
Statutory Requirements
Hereby Guardall, declares that the Dual Comms module and PSTN module is in compliance
with the essential requirements and other relevant provisions of Directive 1999/5/EC.
If you have any doubts concerning the suitability, connection or uses of this apparatus then consult a
suitably qualified person before continuing.
SUITABILITY FOR USE
The apparatus has been designed to work on all European analogue networks. It provides the
following facilities:
1. Alarm transmission and transmission/reception of configuration data.
2. Automatic Call Initiation.
3. Series connection.
4. Dial tone Detection
5. Automatic dialling using DTMF tones.
6. Automatic Call Answering.
7. Stored number dialling.
8. Timed Break Register Recall.
It is not suitable for connection to PABX systems or for use as an extension to a payphone.
The Dual comm module and the GSM module are fitted with a GSM engine which has been declared
compliant with the essential requirements of Directive 1995/05/EC by the manufacturer Dia telecom
Spa (Telit). The conformity assessment procedure referred to in Article 10 and detailed in Annex IV of
Directive 1999/05/EC was carried out by a Notified Body, namely BABT, Walton-on-Thames, UK
(Notified body number 0168).