Specification Sheet

Eyewashes
Guardian Equipment
1140 N North Branch St
Chicago, IL 60642
312 447 8100 telephone
312 447 8101 facsimile
gesafety.com
ETL Listed 101496.
Units have been tested
to and comply with
ANSI Z358.1-2014.
Listed 8116. Units have been
tested to and comply with
ANSI Z358.1-2014 and the
Uniform Plumbing Code.

G1814P Eyewash, Wall Mounted, Plastic Bowl
Application: Eyewash for wall mounting. Two GS-Plus™ spray-
type spray heads deliver a flood of water for rinsing eyes.
Spray Head Assembly: Two GS-Plus™ spray heads. Each head
has a “flip top” dust cover, internal flow control and filter to
remove impurities from the water flow.
Valve: 1/2" IPS chrome plated brass stay-open ball valve. Valve
is US-made with chrome plated brass ball and Teflon® seals.
Bowl: 11-1/2" diameter orange ABS plastic.
Mounting: Heavy duty cast aluminum wall bracket with
corrosion resistant powder coated finish.
Supply: 1/2" NPT female inlet.
Waste: 1-1/4" NPT female outlet.
Sign: ANSI-compliant identification sign.
Quality Assurance: Unit is completely assembled and water
tested prior to shipment.
Available Options

DC Stainless steel dust cover for each spray head.

GRN Green ABS plastic bowl.

YEL Yellow ABS plastic bowl.

HS Auxiliary hand-held drench hose for rinsing eyes, face
or body.

SC Self-closing ball valve. Note: Eyewashes with self-closing
valves do not comply with ANSI Z358.1-2014.

T Chrome plated brass tailpiece and trap with 1-1/2" IPS
waste connection.

TP 1-1/2" OD Chrome plated brass tailpiece.

TMV G3600LF thermostatic mixing valve precisely blends
hot and cold water to deliver warm (tepid) water as
required by ANSI Z358.1-2014. Refer to “Tempering Units”
section for complete technical and product selection
information.