Product Manual

Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 phone: [phone] fax: [phone] www.guardianfall.com
7 85114 (Rev. H)
Labels
1-800-466-6385
www.guardianfall.com
6305 S. 231st St.
Kent, WA 98032
Prior to use, read and
understand all manufacturer’s
instructions provided with
equipment at time
of shipment.
Date of Manufacture:
Worker capacity range:
(including all equipment)
130-310 lbs.
Materials:
Polyester, galvanized steel,
and zinc-plated steel.
All PFAS equipment must be
selected and deemed compatible
by Competent Person.
All installation, set-up, and use
of HLL must be done under
supervision of Qualified Person.
Refer to instructions for
compatible connections and
installation procedure.
Always avoid all hazards,
including, but not limited to,
chemicals, corrosive substances,
excessive heat, electric shock,
and sharp and abrasive
edges and surfaces.
!
WARNING
Compliant with all applicable
OSHA 1910, OSHA 1926
Subpart M, ANSI Z359.1-2007,
and ANSI A10.32-2012
regulations.
90138 (Rev. C)
Kernmantle HLL
Part #:
MAXIMUM 2 workers
per Kernmantle HLL.
User must inspect prior to EACH use. Competent
Person must complete formal inspection every
6 months. Competent Person to inspect and initial.
20___ 20___20___ 20___20___
INSPECTION GRID
J
F
M
A
M
J
J
A
S
O
N
D
If equipment fails inspection
IMMEDIATELY REMOVE FROM SERVICE
DO NOT REMOVE LABELS
YR
MO
User must inspect prior to EACH use. Competent
Person must complete formal inspection every 6
months. Competent Person to inspect and initial.
20___ 20___20___ 20___20___
INSPECTION GRID
J
F
M
A
M
J
J
A
S
O
N
D
If equipment fails inspection
IMMEDIATELY REMOVE FROM SERVICE
DO NOT REMOVE LABELS
YR
MO
1-800-466-6385
www.guardianfall.com
6305 S. 231st St.
Kent, WA 98032
Prior to use, read and understand all
manufacturer’s instructions provided with
equipment at time of shipment.
Date of Manufacture:
Worker capacity range: (including all
equipment) 130-310 lbs. per worker.
Materials: Polyester, galvanized steel, and
zinc-plated steel.
All PFAS equipment must be selected and
deemed compatible by Competent Person.
All installation, set-up, and use of HLL must be
done under supervision of Qualified Person.
Refer to instructions for compatible connections
and installation procedure.
Always avoid all hazards, including, but not
limited to, chemicals, corrosive substances,
excessive heat, electric shock, and sharp and
abrasive edges and surfaces.
!
WARNING
Compliant with all applicable OSHA 1910,
OSHA 1926 Subpart M, ANSI Z359.1-2007,
and ANSI A10.32-2012 regulations.
90468
(Rev. B)
Kernmantle HLL
Part #:
MAXIMUM 2 workers per Kernmantle HLL.
Date of First Use: __________________.
Product lifetime is indefinite, as
long as product passes all
inspection requirements.
Date of First Use: __________________.
Product lifetime is indefinite, as
long as product passes all
inspection requirements.