Product Manual

Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 phone: [phone] fax: [phone] www.guardianfall.com
Beamer 2000
Materials: aluminum, bronze manganese, zinc-plated steel, stainless steel.
Compliant with all OSHA 1910, OSHA 1926 Subpart M,
ANSI Z359.1-07, and ANSI A10.32-2012 regulations.
Beamer Anchors are suitable for the following applications:
MAXIMUM 1 user per Beamer Anchor.
UPC-A Codes:
00101: 6 7242100101 2
00103: 6 7242100103 6
Packing Dimensions: 20”L x 6”W x 6”H.
Weight: 4 lbs. per unit.
Quantity: 200 per pallet; 800 lbs. total.
Part # Description
00101
00103
Horizontal beam anchor. Compatible beam flange: 3--1/2” - 14”
Horizontal beam anchor. Compatible beam flange: 6” - 16”
MAXIMUM beam flange thickness: 1--1/4”.
Personal Fall Arrest: Beamer Anchors may be
used in Personal Fall Arrest applications to support
a MAXIMUM 1 Personal Fall Arrest System (PFAS).
Structure must withstand loads applied in the
directions permitted by the system of at least
5,000 lbs. Maximum free fall is 6‘, unless used in
combination with equipment explicitly certified
for extended free fall. Maximum extended free
fall is 12’. Applicable D-ring: Dorsal.
Restraint: Beamer Anchors may be used in Restraint applications. Restraint systems prevent workers from
reaching the leading edge of a fall hazard. Always account for fully deployed length of lanyard/SRL. Structure
must withstand loads applied in the directions permitted by the system of at least 1,000 lbs. No free fall is
permitted. Restraint systems may only be used on surfaces with slopes up to 4/12 (vertical/horizontal).
Applicable D-rings: Dorsal, Chest, Side, Shoulder.
For all applications: worker weight capacity range (including all clothing, tools, and equipment)
is 130-310 lbs., or up to 420 lbs. when used with equipment explicitly certified for such use.
Never for use in vertical applications. For use on steel I or H beams only.
Not repairable.
Remove from service
if exposed to forces
of fall arrest.