Product Manual

www.guardianfall.com1-800-466-6385 6305 S. 231st St.
Kent, WA 98032
Connector Hardware
Part #:
USER MUST READ AND UNDERSTAND ALL INSTRUCTIONS PRIOR TO USE.
All Guardian Fall Protection Connector Hardware made from steel or aluminum.
Compliant with all OSHA 1926 Subpart M, ANSI A10.32-2012,
and ANSI Z359.1-2007 OR ANSI Z359.12-2009 regulations.
Ensure that ALL connections are selected and deemed compatible with applicable Connector Hardware by a
Competent Person.
Prior to work, ALWAYS read and understand ALL Connector Hardware markings.
For use in Fall Arrest applications, connector gate MUST be marked to withstand 3,600 lb. load.
MINIMUM breaking strength of all Connector Hardware: 5,000 lbs.
When not in use, store Connector Hardware in a location absent of all potential hazards, including, but not limited
to, heat, light, excessive moisture, corrosive substances, dirt, and other contaminants. Before and after each use,
clean all Connector Hardware. If equipment cannot be wiped clean, use mild soap and water, then rinse, wipe,
and hang to dry. NEVER use bleach or other corrosive cleaning agents.
01822-A
01823-A
01820
01825/01826
01830
01870
01835 01850
01813-S-HS
01817