Product Name: Rope Grab Part #: 01500; 01503; 01505; 01506; 01507; 01511 Instruction Manual Do not throw away these instructions! Read and understand these instructions before using equipment! Introduction 1 Applicable Safety Standards 1 Worker Classifications 1 Product Specific Applications 2 Limitations 2-3 Components and Specifications 3 Installation and Use 4 Maintenance, Cleaning, and Storage 5 Inspection 5 Inspection Log 5 Safety Information 6 Labels 7
Date of First Use: Serial #: Trainer: User: Applicable Safety Standards When used according to instruction specifications, this product meets or exceeds all applicable OSHA 1926 Subpart M, OSHA 1910, ANSI Z359.1-2007, and ANSI A10.32-2012 standards for fall protection. Applicable standards and regulations depend on the type of work being done, and also might include state-specific regulations. Consult regulatory agencies for more information on personal fall arrest systems and associated components.
www.guardianfall.com phone: (800) 466-6385 fax: (800) 670-7892 Product Specific Applications ! WARNING Use of equipment in unintended applications may result in serious injury or death. Maximum 1 attachment per connection point. Personal Fall Arrest: Rope Grab may be used to support a MAXIMUM 1 Personal Fall Arrest System (PFAS) for use in Fall Arrest applications. Structure must withstand loads applied in the directions permitted by the system of at least 5,000 lbs. Maximum free fall is 6‘.
Two or more snap hooks or carabiners connected to each other. NO. Connector directly to webbing. NO. Two connectors to same D-ring. NO. Application that places load on gate. NO. Incompatible or irregular application, which may increase risk of roll-out. NO. Connector directly to horizontal lifeline. NO. Components and Specifications Materials: galvanized steel, stainless steel, nylon, and polyester.
www.guardianfall.com phone: (800) 466-6385 fax: (800) 670-7892 01503 01500 01506 01507 01505 01511 Installation and Use 6305 S. 231st St., Kent, WA 98032 Prior to installation: 1. Robe Grab for use in combination with compatible vertical lifeline (VLL). Ensure VLL on which Rope Grab is to be installed is compliant with all applicable OSHA and ANSI regulations. • Compatible with VLL with diameters from 1/2” - 5/8”. ! WARNING NEVER use with incompatible lifelines. 2.
4. Ensure Rope Grab always travels along VLL as worker moves across work surface. For part # 01506, when used as positioning device, lift up D-ring to reposition along VLL. For part # 01506, transition between trailing and positioning functionality by releasing tension lever. 1. Trailing Positioning 2. Maintenance, Cleaning, and Storage If Rope Grab fails inspection in any way, immediately remove it from service, and contact Guardian to inquire about its return or repair.
www.guardianfall.com phone: (800) 466-6385 fax: (800) 670-7892 Inspection Log User must inspect prior to EACH use. Competent Person other than user must complete formal inspection at least every 6 months. Competent Person to inspect and initial. Date of First Use: __________________. For part #s 01505, 01506, and 01511, product lifetime is indefinite as long as it passes pre-use and Competent Person inspections.
Training of Authorized Persons to correctly erect, disassemble, inspect, maintain, store, and use equipment must be provided by a Competent Person. Training must include the ability to recognize fall hazards, minimize the likelihood of fall hazards, and the correct use of personal fall arrest systems. NEVER use fall protection equipment of any kind to hang, lift, support, or hoist tools or equipment, unless explicitly certified for such use.
