Product Manual

beamLabs.io 1-800-436-9186 19
%FTJSFE
61MJNJU
1SFTTBOESFMFBT
F
5SPMMFZ 
4UPQ#PMU
.JOJNVNwDMFBSBODF
Z

HQ


1SFTTBOESFMFBTF
-*.*5KVTUPODF
1SFTTBOEIPME61
TRAVEL LIMIT ADJUSTMENT - UP LIMIT
Press and Release LIMIT button once, green light (UP) will turn on. With green light on, press and hold UP
button, the door will go UP to the desired UP limit position.
Press and release
LIMIT just once
Trolley
Desired
UP limit
Press and release LIMIT just once
WARNING
To prevent SERIOUS INJURY or DEATH from
improper Force Adjustment:
• YOU CANNOT adjust force manually to compensate
for binding or sticking of the garage door. Call
a qualified garage door service person to make
necessary adjustments in case of binding.
• YOU CANNOT manually increase the force required
for closing the door.
• Aer ANY adjustments, Safety Reverse Test MUST be
performed to ensure the door reverses on contact
with a 1.5 inch (3.8 cm) high object (2x4 laid flat).
Press and hold UP
* DO NOT HIT STOP BOLT *
There should be a minimum 2 inch (5 cm) gap
between trolley and stop bolt.
Once the door is at the desired UP limit position,
press and release “LIMIT” button once, “OK”
indicator (orange) flashes and turns off. The UP
limit is set.
Minimum 2 inch (5 cm) gap
Stop Bolt
Need text from up down limit 110518 PDF