User manual
 ACT1000/2000 Operating Instructions Software Version 3.23-00 
Page 2 of 32 
Operator Menu 
User Setup  Enable 
Allow a user or range of users to open the door 
  Disable 
Prevent a user or range of users from opening the door 
  Assign Names 
Enter a name for each user 
  Assign Groups 
Assign users to groups 
  Assign Options 
Specify options for each user 
  Assign PINs 
Set the individual PIN for each user 
  Learn 
Learn randomly coded cards (e.g. Bank Cards) 
  Batch Cards
Assign a batch of cards to a range of users 
  One-To-One
Assign a card to a user 
  Card Validity
2
Set a validity period for a user. 
Group Setup  Enable 
Allow users in specified groups to open the door 
  Disable 
Prevent users in specified groups from opening the door 
  Assign Names 
Enter a name for each group 
  Access Rights 
Specify what access rights apply to each group 
  Assign Options 
Specify output and PIN options for each group 
  Assign PINs 
Set the PIN for each Group. 
System Log  Display Log 
Show the system log on the display (recent events first) 
  Print Log 
Print the system log on an attached serial printer 
  Filter Log
2 
Prevent events entering the system log 
Control Door
1
  Lock Door 
Lock door - prevent all cards from opening it. 
  Unlock Door 
Unlock door - relay is activated so cards are not required. 
  Normalise Door 
Set a door back to normal operation 
  Pass Door 
Momentarily open a door for the programmed time 
  AUX output on 
Switches the auxiliary output on 
  AUX output off 
Switches the auxiliary output off 
User Tracking
2
  Log in 
Log a user into the tracking area 
  Log out 
Log a user out of the tracking area 
  Clear All 
Remove all users from the tracking area 
Set Date/Time 
Set the current date and time for the system  
Time Zones 
Specify the time periods and days which apply to a given timezone 
Set Holidays 
Specify which days within the next year are holidays 
Issue Number 
Set the current system issue level (if issue checking option enabled) 
Change PIN 
Change the PIN used to access the operator menu 
Exit from the menu is automatic if no keys are pressed for a period of time. 
1
On the ACT2000, you will first be prompted for a door. 
2
Only present on ACT2000 










