Industrial Communications Worldwide Weather Resistant Industrial Telephones WRT-A Series Installation & Operation WRT - 30 - A WRT-30-A WRT-10-A WRT-10-A WRT-40-A P006290 Rev. A 5/19/2005 8:09 AM 7552 - 10th Street N.E. Calgary, Alberta, Canada T2E 8W1 Ph: 403.258.3100 \ email:info@guardiantelecom.com \ www.guardiantelecom.
Guardian Telecom Inc. Installation and Operation Model WRT-A Table of Contents Package Contents.................................................................................2 WRT-A Models and Options .................................................................2 Options Available ..................................................................................2 Overview ...............................................................................................3 Standard Features On All Models .
Guardian Telecom Inc. Installation and Operation Model WRT-A Overview WRT-A Weather Resistant Telephone Series WRT-A telephones are designed to provide safe, reliable communication in areas prone to high humidity, chemical vapors, dust and physical abuse. Several variations and options are available to suit the end user’s requirements.
Guardian Telecom Inc. Installation and Operation Model WRT-A MAGNETIC REED HOOK SWITCH 3X4 KEYPAD (WRT-10-WATERPROOF, WRT-30 & WRT-40 - METAL) 16 GA STEEL, SATIN COAT PRIMED AND POWDER COATED VELCRO DOOR LATCH ID & APPROVALS HEAVY DUTY HANDSET CORD WIRING ACCESS PLATE Figure 1 - Features - Typical - Standard Models Ø0.3" [Ø7mm] 9.7" [246mm] 8.8" [224mm] Figure 2 - Overall Dimensions Page 4 13.0" [330mm] 11.8" [300mm] 3.9" [99mm] 14.0" [356mm] 3.8" [97mm] 2.9" [74mm] 12.0" [305mm] 3.
Guardian Telecom Inc. Installation and Operation Model WRT-A Installing the WRT-A • • WRT-A telephones shall be installed by qualified service personnel. The WRT-A is set to tone dialing when shipped. If pulse dialing is required see the section on Setting Dialing Mode. • Follow all appropriate electrical codes and use only approved electrical fittings for the installation. • Choose a wall location that is free of obstructions and permits space for wiring. • Ensure mounting can support 6.5 lbs (2.
Guardian Telecom Inc. Installation and Operation Model WRT-A Setting Dialing Mode The WRT-A is shipped from the factory set for DTMF (Tone) dialing mode. If loop disconnect (Pulse) dialing is required proceed as follows. • • • • See: Figure 3 - Setting Dialing Mode & Installation Loosen the five captive screws in the faceplate and swing the faceplate to the left. If the set is on a vertical surface the faceplate will stay open like a book in this position. Take care not to disturb the internal wiring.
Guardian Telecom Inc. Installation and Operation Model WRT-A Field Repairs & Adjustments Field repairs may only be carried out by qualified technicians using OEM parts. Substitution of parts voids warranty and may pose a hazard to users of the equipment. See: Replacement Parts • Disconnect the telephone from Tip and Ring power supplied by the PABX or central office before attempting repairs. • Loosen the five captive screws in the faceplate and swing the faceplate to the left.
Guardian Telecom Inc. Installation and Operation Model WRT-A Engineering Specifications *ELECTRICAL PERFORMANCE AUDIBLE RANGE FREQUENCY RESPONSE 300 – 3400 HZ DIALING METHOD DTMF OR 33/66 PULSE AT 10 PPS SEND LOUDNESS RATING (SLR) dB SHORT 8 dB +/- 4 dB RECEIVE LOUDNESS RATING (RLR) dB SHORT -4 dB +/- 4 dB SIDE TONE MASKING RATING (STMR) >11 dB RINGER OUTPUT 75 dB MAXIMUM RINGER EQUIVALENCE 0.
Guardian Telecom Inc. Installation and Operation Model WRT-A COMPLIANCE ACA N14510 DOC 1012 6721 A FCC HQHCAN-22517-TE-E WEATHERPROOF ENCLOSURE NEMA 3R ENVIRONMENTAL SURVIVABILITY MIL-STD-810E Replacement Parts Part No.
Guardian Telecom Inc. Installation and Operation Model WRT-A Government Certification Attached to the telephone is a label for the Australian Communications Authority. This identifies equipment certifications indicating the WRT-A series telephones meet certain telecommunications network protective, operational and safety requirements. This agency does not guarantee the equipment will operate to the user's satisfaction.
Guardian Telecom Inc. Installation and Operation Model WRT-A Warranty Guardian Telecom warrants your product to be free of defects in material and workmanship for a period of one year. Guardian Telecom will repair or replace any defective unit that is under warranty free of charge. This warranty is null and void if any non-authorized modifications have been made to this product, or if it has been subjected to misuse, neglect, or accident.
Guardian Telecom Inc. Installation and Operation Model WRT-A Guardian Product Return Guardian products have been quality tested and are in full working order when shipped from the factory, given the rugged nature of these products shipping is not expected to damage a unit. In the unlikely event of a malfunction, Guardian follows the three step procedure below.
Guardian Telecom Inc. Installation and Operation Model WRT-A Notes: Model No. Part No. Serial No.
Guardian Telecom Inc. 7552 - 10th Street N.E. Calgary, Alberta, Canada T2E 8W1 Toll-free 1-800-363-8010 Ph. (403) 258-3100 Fax. (403) 253-4967 www.guardiantelecom.com E-mail: mailto:sales@guardiantelecom.com (Click to open message box) Industrial Communications Worldwide © Guardian Telecom Inc.