Product Name: Beamer 3000 & Minotaur Part #: 00104; 00106 Instruction Manual Do not throw away these instructions! Read and understand these instructions before using equipment! Introduction 1 Applicable Safety Standards 1 Worker Classifications 1 Product Specific Applications 2 Limitations 2-3 Components and Specifications 3 Installation and Use 4 Maintenance, Cleaning, and Storage 5 Inspection 5 Inspection Log 5 Safety Information 6 Labels 7
User Information Date of First Use: Serial #: Trainer: User: Applicable Safety Standards When used according to instruction specifications, this product meets or exceeds all applicable OSHA 1926 Subpart M, OSHA 1910, ANSI Z359.1-2007, and ANSI A10.32-2012 standards for fall protection. Applicable standards and regulations depend on the type of work being done, and also might include state-specific regulations.
www.guardianfall.com phone: (800) 466-6385 fax: (800) 670-7892 6305 S. 231st St., Kent, WA 98032 Guardian Fall Protection Product Specific Applications ! WARNING Use of equipment in unintended applications may result in serious injury or death. Maximum 1 attachment per connection point. Personal Fall Arrest: Beamer 3000/Minotaur may be used to support a MAXIMUM 1 PFAS for use in Fall Arrest applications.
Two or more snap hooks or carabiners connected to each other. NO. Connector directly to webbing. NO. Two connectors to same D-ring. NO. Application that places load on gate. NO. Incompatible or irregular application, which may increase risk of roll-out. NO. Connector directly to horizontal lifeline. NO. Components and Specifications Materials: High Strength Load Bar: Aluminum. Adjustment Clamps and Toggles: Manganese Bronze. D-ring: Nickel-Plated Steel. Internal Spring: Zinc-Plated Steel.
www.guardianfall.com phone: (800) 466-6385 fax: (800) 670-7892 6305 S. 231st St., Kent, WA 98032 Guardian Fall Protection Installation and Use Beamer 3000 (#00104): • Compatible beam flange thickness: 1/4” - 1--1/4”. • Compatible beam width: 3--1/2” - 14”. Minotaur (#00106): • Compatible beam flange thickness: 1/4” - 2--1/2”. • Compatible beam width: 14” - 30”. • Beamer 3000/Minotaur MUST NOT be used as permanent anchor.
When not in use, store equipment where it will not be affected by heat, light, excessive moisture, chemicals, or other degrading elements. Inspection Prior to EACH use, inspect Beamer 3000/Minotaur for deficiencies, including, but not limited to, corrosion, deformation, pits, burrs, rough surfaces, sharp edges, cracking, rust, paint buildup, excessive heating, alteration, and missing or illegible labels.
www.guardianfall.com phone: (800) 466-6385 fax: (800) 670-7892 6305 S. 231st St., Kent, WA 98032 Guardian Fall Protection Safety Information ! WARNING Failure to understand and comply with safety regulations may result in serious injury or death. Regulations included herein are not all-inclusive, are for reference only, and are not intended to replace a Competent Person’s judgment or knowledge of federal or state standards. Do not alter equipment. Do not misuse equipment.
www.guardianfall.com Inspection Grid: Inspect prior to each use. Competent Person must inspect and record at least every 6 months. Beamer Series Structural Steel Fall Protection Part #: 90232 (Rev. B) WARNING! READ CAREFULLY BEFORE USING 6305 S. 231st St., Kent, WA 98032 ANSI Z359.1-07, ANSI A10.32-12, OSHA 1910, and OSHA 1926 Subpart M. Maximum 1 connection per Beamer Anchor. Capacity range: 130 - 420 lbs. Minimum breaking strength: 5,000 lbs. Materials: aluminum, manganese, bronze, and steel.
