Product Name: Concrete Swivel Anchor Part #: 00240, 00241, 00242, 00243, 00244 Instruction Manual Do not throw away these instructions! Read and understand these instructions before using equipment! Introduction 1 Applicable Safety Standards 1 Worker Classifications 1 Product Specific Applications 1-2 Limitations 2-3 Components and Specifications 4 Installation and Use 5 Maintenance, Cleaning, and Storage 5 Inspection 5 Inspection Log 6 Safety Information 6-7 Labels 7
Date of First Use: Serial #: Trainer: User: Applicable Safety Standards When used according to instruction specifications, this product meets or exceeds all applicable OSHA 1926 Subpart M, OSHA 1910, ANSI Z359.1-2007, and ANSI A10.32-2012 standards for fall protection. Applicable standards and regulations depend on the type of work being done, and also might include state-specific regulations. Consult regulatory agencies for more information on personal fall arrest systems and associated components.
www.guardianfall.com phone: (800) 466-6385 fax: (800) 670-7892 6305 S. 231st St., Kent, WA 98032 Guardian Fall Protection Product Specific Applications ! WARNING Use of equipment in unintended applications may result in serious injury or death. Maximum 1 attachment per connection point. Personal Fall Arrest: Concrete Swivel Anchor may be used to support a MAXIMUM 1 PFAS for use in Fall Arrest applications.
Connector closed and locked to D-ring. OK. Connector to integral lanyard. NO. Two connectors to same D-ring. NO. Connector directly to webbing. NO. Incompatible or irregular application, which may increase risk of roll-out. NO. Connector directly to horizontal lifeline. NO. Correct Anchorage Positioning: This chart details allowable working zones required to reduce risk of swing falls and improper side loading. ALWAYS adhere to information specified by chart.
www.guardianfall.com phone: (800) 466-6385 fax: (800) 670-7892 6305 S. 231st St., Kent, WA 98032 Guardian Fall Protection Components and Specifications Materials: stainless steel Part # Description 00240 Concrete Swivel Anchor D-ring and Bracket Assembly 00241 00242 Concrete Swivel Anchor Bolt (HSL-3-B M 12/5) Concrete Swivel Anchor Kit.
www.guardianfall.com 2. Clean hole using compressed air. Ensure hole is fully clean of all debris. 4--3/8” 3. Disassemble bolt. 4. Reassemble bolt with Concrete Swivel Anchor D-ring and Bracket Assembly. In order, pass Inner Bolt through Washer, D-ring and Bracket Assembly, and Outer Bolt Components (see image on right). Ensure bolt end cap (#6) is hand-tight and fully secure. 6. 5. 4. 3. 2. 1. 5. Use a hammer to drive Concrete Swivel Anchor and bolt into hole.
www.guardianfall.com phone: (800) 466-6385 fax: (800) 670-7892 6305 S. 231st St., Kent, WA 98032 Guardian Fall Protection Inspection Prior to EACH use, inspect Concrete Swivel Anchor for deficiencies, including, but not limited to, corrosion, deformation, pits, burrs, rough surfaces, sharp edges, cracking, rust, paint buildup, excessive heating, alteration, and missing or illegible labels.
A pre-planned rescue procedure in the case of a fall is required. The rescue plan must be project-specific. The rescue plan must allow for employees to rescue themselves, or provide an alternative means for their prompt rescue. Store rescue equipment in an easily accessible and clearly marked area. Training of Authorized Persons to correctly erect, disassemble, inspect, maintain, store, and use equipment must be provided by a Competent Person.
