Item Brochure

Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 phone: [phone] fax: [phone] www.guardianfall.com
Standing Seam
Roof Clamp
Part #: 00250
NEVER install on incompatible standing seam roof. Contact Guardian for more information.
Materials: powder-coated and galvanized steel.
Compliant with all OSHA 1910, OSHA 1926 Subpart M,
ANSI Z359.1-2007, and ANSI A10.32-2012 regulations.
Standing Seam Roof Clamp is suitable for the following applications:
MAXIMUM 1 connection per Standing Seam Roof Clamp.
UPC-A Code: 672421002507
Custom configurations not available. Not repairable.
Contact customer service for details.
Personal Fall Arrest: Standing Seam Roof Clamps may be used to support a MAXIMUM 1 Personal Fall Arrest
System (PFAS), which includes a self-retracting lifeline, for use in Fall Arrest applications. Structure must
withstand loads applied in the directions permitted by the system of at least 5,000 lbs. Maximum free fall is 6’,
or up to 12’ if used in combination with equipment explicitly certified for such use. Applicable D-ring: Dorsal.
Restraint: Standing Seam Roof Clamps may be used in Restraint applications. Restraint systems prevent workers
from reaching the leading edge of a fall hazard. Always account for fully deployed length of lanyard/SRL.
Structure must withstand loads applied in the directions permitted by the system of at least 1,000 lbs. No free
fall is permitted. Restraint systems may only be used on surfaces with slopes up to 4/12 (vertical/horizontal).
Applicable D-rings: Dorsal, Chest, Side, Shoulder.
For all applications: worker weight capacity range
(including all clothing, tools, and equipment) is 130-310 lbs.
Adjusts to fit roof seams between 24” - 36” in width.
Compatible with SRLs up to 65’ in length.
SRLs from 50’ - 65’ require Retractable Swivel Adapter (product #: 10975).