Item Brochure

Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 phone: [phone] fax: [phone] www.guardianfall.com
Ridge-It Anchor
Materials: stainless steel, zinc-plated steel, and butyl.
Fasteners: 3” stainless steel spiral nails.
#00500 and #00510: 8 provided nails. #00515: 12 provided nails.
Compliant with all OSHA 1910, OSHA 1926 Subpart M,
ANSI Z359.1-2007, and ANSI A10.32-2012 regulations.
Ridge-It Anchor is suitable for the following applications:
MAXIMUM 1 connection per Ridge-It Anchor.
UPC-A Codes: 00500: 672421005003; 00510: 672421005106; 00515: 672421005157
Custom configurations not available. Not repairable.
Contact customer service for details.
Part # Length Description
00500 9¾”
00515
00510
Ridge-It Anchor w/1 D-ring
Ridge-It Tile Anchor w/1 D-ring22”
Ridge-It Anchor w/2 D-rings17½”
Restraint: Ridge-It Anchors may be used in Restraint
applications. Restraint systems prevent workers from
reaching the leading edge of a fall hazard. Always account
for fully deployed length of lanyard/SRL. Structure must
withstand loads applied in the directions permitted by the
system of at least 1,000 lbs. No free fall is permitted.
Restraint systems may only be used on surfaces with
slopes up to 4/12 (vertical/horizontal). Applicable D-rings:
Dorsal, Chest, Side, Shoulder.
For all applications: worker weight capacity range
(including all clothing, tools, and equipment) is 130-420 lbs.
* Part # 00511 is no longer available. Part #00510 now incorporates all previous features of part
# 00511, including butyl strips and flat D-rings.
Personal Fall Arrest: Ridge-It Anchors may be used to
support a MAXIMUM 1 Personal Fall Arrest System (PFAS)
for use in Fall Arrest applications. Structure must withstand
loads applied in the directions permitted by the system of
at least 5,000 lbs. Maximum free fall is 6‘, or up to 12’ if
used in combination with equipment explicitly certified for
such use. Applicable D-ring: Dorsal.
00500 00510 00515