Item Brochure

Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 phone: [phone] fax: [phone] www.guardianfall.com
CB Anchor Series
Materials: galvanized steel or powder-coated steel.
Compliant with all OSHA 1910, OSHA 1926 Subpart M,
ANSI Z359.1-2007, and ANSI A10.32-2012 regulations.
CB Anchors are suitable for the following applications:
MAXIMUM 1 connection per CB Anchor.
Custom configurations available. Not repairable. Contact customer service for details.
Standard Swivel Top Post Base Description
#00645
#00656
#00690
#00657
#10645
#10656
#10681
#10683
#00680
#00651
#00652
#00653
#10651
#10652
12”
18”
24”
18”
12”
18”
16” x 16”
12” x 12”
12” x 12”
16” x 16”
16” x 16”
12” x 12”
CB-12 for wood, steel, and concrete
CB-18 for concrete
CB-24 for steel and concrete
CB-18 for wood and steel
CB-12 Weld-On Post
CB-18 Weld-On Post
Backer Plate for CB-12
Backer Plate for CB-18
CB swivel top system for CB-12 or CB-18
#00600 6” x 6” CB-1-B
#00610 2½
” Diameter
CB-1-W Weld-On Anchor
Personal Fall Arrest: CB Anchors may be used in Personal Fall Arrest applications to support a MAXIMUM 1
PFAS. Structure must withstand loads applied in the directions permitted by the system of at least 5,000 lbs.
Maximum allowable free fall is 6’, unless used in combination with equipment explicitly certified for extended
free fall of up to 12’. Applicable D-ring: Dorsal.
Restraint: CB Anchors may be used in Restraint applications. Restraint systems prevent workers from reaching
the leading edge of a fall hazard. Structure must withstand loads applied in the directions permitted by the
system of at least 1,000 lbs. No vertical free fall is permitted. Restraint systems may only be used on surfaces
with slopes up to 4/12 (vertical/horizontal). Applicable D-rings: Dorsal, Chest, Side, Shoulder.
Work Positioning: CB Anchors may be used in Work Positioning applications. Work Positioning systems allow a
worker to be supported while in suspension and work freely with both hands. Structure must withstand loads
applied in the directions permitted by the system of at least 3,000 lbs. Maximum allowable free fall is 2’.
Applicable D-rings: Side, Shoulder.
For all applications: worker weight capacity range
(including all clothing, tools, and equipment) is 130-420 lbs.
Confined Space/Rescue: CB Anchors may be used in Confined Space/Rescue applications. Confined Space/
Rescue systems are those capable of recovering a worker from a confined location or after they are exposed to
a fall. Structure must withstand loads applied in the directions permitted by the system of at least 3,000 lbs.
No vertical free fall is permitted. Applicable D-rings: Dorsal, Chest, Shoulder.
CB-1-WCB-1-B
Weld-On
Post
Standard Swivel Top
Suitable for use in combination with HLL System. HLL systems must be designed, installed, and used under the supervision
of a Competent Person.