Item Brochure
Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 phone: (800) 466-6385 fax: (800) 670-7892 www.guardianfall.com
FR Kevlar Harness
Personal Fall Arrest: FR Kevlar Harness may be used in Personal Fall
Arrest applications as a component of a Personal Fall Arrest System (PFAS).
Structure must withstand loads applied in the directions permitted by the
system of at least 5,000 lbs. Maximum free fall is 6’, unless used in
combination with equipment explicitly certified for extended free fall.
Applicable D-ring: Dorsal.
Restraint: FR Kevlar Harness may be used in Restraint applications. Restraint systems prevent workers from
reaching the leading edge of a fall hazard. Always account for fully deployed length of lanyard/SRL. Structure
must withstand loads applied in the directions permitted by the system of at least 1,000 lbs. No free fall is
permitted. Restraint systems may only be used on surfaces with slopes up to 4/12 (vertical/horizontal).
Applicable D-rings: Dorsal, Chest, Side, Shoulder.
Work Positioning: FR Kevlar Harness, configured with side or shoulder D-rings, may be used in Work
Positioning applications. Work Positioning systems allow a worker to be supported while in suspension and
work freely with both hands. Structure must withstand loads applied in the directions permitted by the system
of at least 3,000 lbs. Maximum allowable free fall is 2’. Applicable D-rings: Side, Shoulder.
Rescue/Confined Space: FR Kevlar Harness may be used in Rescue/Confined Space applications. Rescue
systems function to safely recover a worker from a confined location or after exposed to a fall. There are
various configurations of Rescue systems depending on the type of rescue. Structure must withstand loads
applied in the directions permitted by the system of at least 3,000 lbs. No free fall is permitted. Applicable
D-rings: Dorsal, chest, shoulder.
Product-Specific Applications
Always follow all manufacturer's instructions for proper adornment and use. Some steps of adorning a harness may require
assistance from another person.
Upon completely adorning a harness, Guardian Fall Protection recommends that another person, with knowledge of the safe
and correct use of the harness, inspect to ensure the harness is being worn correctly.
Materials: Kevlar and galvanized steel.
For all applications: worker weight capacity range
(including all clothing, tools, and equipment) is 130-420 lbs.
Compliant with all applicable OSHA 1910, OSHA 1926 Subpart M,
ANSI Z359.1-2007, and ANSI A10.32-2012 regulations.
Maximum 1 connection per FR Kevlar Harness.
Part # Size Description
00900 M - L FR Kevlar Harness
00920
00905
M - L
XL
FR Kevlar Harness w/Side D-rings
FR Kevlar Harness