Product Name: FR Kevlar Harness Part #: 00900; 00905; 00920 Instruction Manual Do not throw away these instructions! Read and understand these instructions before using equipment! Introduction 1 Applicable Safety Standards 1 Worker Classifications 1 Product Specific Applications 1-2 Limitations 2-3 Components and Specifications 3 Installation and Use 4 Maintenance, Cleaning, and Storage 5 Inspection 5 Inspection Log 5 Safety Information 6 Labels 7
Serial #: Trainer: User: Applicable Safety Standards When used according to instruction specifications, this product meets or exceeds all applicable OSHA 1926 Subpart M, OSHA 1910, ANSI Z359.1-2007, and ANSI A10.32-2012 standards for fall protection. Applicable standards and regulations depend on the type of work being done, and also might include state-specific regulations. Consult regulatory agencies for more information on personal fall arrest systems and associated components.
www.guardianfall.com phone: (800) 466-6385 fax: (800) 670-7892 6305 S. 231st St., Kent, WA 98032 Guardian Fall Protection Product Specific Applications ! WARNING Use of equipment in unintended applications may result in serious injury or death. Maximum 1 attachment per connection point. Personal Fall Arrest: FR Kevlar Harness may be used to support a MAXIMUM 1 personal fall arrest system (PFAS) for use in Fall Arrest applications.
Connector to integral lanyard. NO. Two connectors to same D-ring. NO. Connector directly to webbing. NO. Incompatible or irregular application, which may increase risk of roll-out. NO. Connector directly to horizontal lifeline. NO. Two or more snap hooks or carabiners connected to each other. NO. Components and Specifications Materials: Kevlar and die-electric steel. Size Description 00900 00905 00920 M-L XL M-L FR Kevlar Harness FR Kevlar Harness FR Kevlar Harness w/Side D-rings www.
www.guardianfall.com phone: (800) 466-6385 fax: (800) 670-7892 6305 S. 231st St., Kent, WA 98032 Guardian Fall Protection Installation and Use All PFAS equipment must be selected and deemed compatible with FR Kevlar Harness by a Competent Person. ALWAYS follow all instructions of all equipment used in combination with FR Kevlar Harness. NEVER attach connector to any place on harness other than D-ring. Connector gate must be self-closing and self-locking, and must withstand minimum load of 3,600 lbs.
Cleaning after use is important for maintaining the safety and longevity of FR Kevlar Harness. Remove all dirt, corrosives, and contaminants from FR Kevlar Harness before and after each use. If FR Kevlar Harness cannot be cleaned with plain water, use mild soap and water, then rinse and wipe dry. NEVER clean FR Kevlar Harness with corrosive substances. When not in use, store equipment where it will not be affected by heat, light, excessive moisture, chemicals, or other degrading elements.
www.guardianfall.com phone: (800) 466-6385 fax: (800) 670-7892 6305 S. 231st St., Kent, WA 98032 Guardian Fall Protection Safety Information ! WARNING Failure to understand and comply with safety regulations may result in serious injury or death. Regulations included herein are not all-inclusive, are for reference only, and are not intended to replace a Competent Person’s judgment or knowledge of federal or state standards. Do not alter equipment. Do not misuse equipment.
www.guardianfall.com ET PE RFOR MANCE SA F NF Compliant with OSHA 1910, OSHA 1926 Subpart M, ANSI Z359.1-2007, and ANSI A10.32-2012. Capacity including tools: 130-420 lbs. GUARDIA Size: Make only compatible connections: Dorsal D-ring for fall arrest attachment. □ SM □ S-M □ MED □ LG If present: Side D-rings for positioning only. Front Loop for use with ladder systems. Retrieval D-rings for rescue & retrieval.
