Item Brochure

Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 phone: [phone] fax: [phone] www.guardianfall.com
Non-Shock Lanyard
Materials: polyester, nylon, steel, aluminum. Contact Guardian Fall Protection with any questions
regarding specific lanyard components or composition.
Compliant with all OSHA 1910, OSHA 1926 Subpart M, ANSI Z359.1-2007, and ANSI A10.32-2012 regulations.
MAXIMUM 1 user per Non-Shock Lanyard.
Personal Fall Arrest: Non-Shock Lanyard may be used to support a MAXIMUM 1 Personal Fall Arrest System (PFAS)
for use in Fall Arrest applications. Structure must withstand loads applied in the directions permitted by the system
of at least 5,000 lbs. Maximum free fall is 6‘, or up to 12’ if used in combination with equipment explicitly certified
for such use. Applicable D-ring: Dorsal.
Restraint: Non-Shock Lanyard may be used in Restraint applications. Restraint systems prevent workers from
reaching the leading edge of a fall hazard. Always account for fully deployed length of lanyard/SRL. Structure must
withstand loads applied in the directions permitted by the system of at least 1,000 lbs. No free fall is permitted.
Restraint systems may only be used on surfaces with slopes up to 4/12 (vertical/horizontal). Applicable D-rings:
Dorsal, Chest, Side, Shoulder.
For all applications: worker weight capacity range (including all clothing, tools, and equipment) is
130-310 lbs., or up to 420 lbs. if used in combination with equipment explicitly certified for such use.
Rescue/Confined Space: Non-Shock Lanyard may be used in Rescue/Confined Space applications. Rescue systems
function to safely recover a worker from a confined location or after exposed to a fall. There are various
configurations of Rescue systems depending on the type of rescue. Structure must withstand loads applied in the
directions permitted by the system of at least 3,000 lbs. No free fall is permitted. Applicable D-rings: Dorsal,
Chest, Shoulder.
Work Positioning: Non-Shock Lanyard may be used in Work Positioning applications. Work Positioning systems
allow a worker to be supported while in suspension and work freely with both hands. Structure must withstand
loads applied in the directions permitted by the system of at least 3,000 lbs. Maximum allowable free fall is 2’.
Applicable D-rings: Side, Shoulder.
Part # Size Description
01280
01250
01260
01265
4’ - 6’
3’
4’
2’
01255
6’
Adjustable Non-Shock Absorbing Lanyard
Non-Shock Absorbing Lanyard - Single Leg
Non-Shock Absorbing Lanyard - Single Leg
Non-Shock Absorbing Lanyard - Single Leg
Non-Shock Absorbing Lanyard - Single Leg
01251
01261
01265
01270
01271
3’
4’ - 6’
6’
Non-Shock Absorbing Lanyard - Single Leg w/Rebar Hook
Non-Shock Absorbing Lanyard - Single Leg w/Rebar Hook
Non-Shock Absorbing Lanyard - Double Leg
Non-Shock Absorbing Lanyard - Single Leg w/Rebar Hook4’
4’ - 6’ Non-Shock Absorbing Lanyard - Double Leg w/Rebar Hooks
01122
01121 18”
18”
Extension Lanyard w/Snap Hook End
Extension Lanyard w/Web Loop End
01289 6’ Non-Shock Absorbing Lanyard - w/Adjustable D-ring & Rebar Hooks
Non-Shock Absorbing Lanyards may only be used in Fall Arrest
applications when used with compatible shock absorber extension.
!
WARNING
Not all Guardian Non-Shock Absorbing Lanyards may be used in every application
type. ALWAYS consider lanyard length, design, and any other structural components.
ALWAYS read and adhere to product labeling. A Competent Person MUST
make a determination regarding correct lanyard application and compatibility.
!
WARNING
Non-Shock Lanyards are suitable for the following applications:
Custom configurations not available. Not repairable. Contact customer service for details.