Item Brochure

Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 phone: [phone] fax: [phone] www.guardianfall.com
Rope Anchor
Part #: 01300
Materials: aluminum.
MAXIMUM 1 user per Rope Anchor
UPC-A Code:
672421013008
Attach rope according to instruction manual.
Personal Fall Arrest: Rope Anchor may be used to support a MAXIMUM 1
Personal Fall Arrest System (PFAS) for use in Fall Arrest applications. Structure
must withstand loads applied in the directions permitted by the system of at
least 5,000 lbs. Maximum free fall is 6‘. Maximum distance between harness
D-ring and fall arrester is 36”. Applicable D-ring: Dorsal.
Restraint: Rope Anchor may be used in Restraint applications. Restraint
systems prevent workers from reaching the leading edge of a fall hazard. Always
account for fully deployed length of lanyard/SRL. Structure must withstand loads
applied in the directions permitted by the system of at least 1,000 lbs. No free fall
is permitted. Restraint systems may only be used on surfaces with slopes up to
4/12 (vertical/horizontal). Applicable D-rings: Dorsal, Chest, Side, Shoulder.
Work Positioning: Rope Anchor may be used in Work Positioning applications. Work Positioning systems allow
a worker to be supported while in suspension and work freely with both hands. Structure must withstand loads
applied in the directions permitted by the system of at least 3,000 lbs. Maximum allowable free fall is 2’.
Applicable D-rings: Side, Shoulder.
Compliant with all OSHA 1910, OSHA 1926 Subpart M,
ANSI Z359.1-2007, and ANSI A10.32-2012 regulations.
Rope Anchor is suitable for the following applications:
Compatible with 5/8” rope ONLY.
For all applications: worker weight capacity range (including all clothing, tools, and equipment) is
130-310 lbs., or up to 420 lbs. if used in combination with equipment explicitly certified for such use.