Item Brochure

Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 phone: [phone] fax: [phone] www.guardianfall.com
Velocity Harness
Personal Fall Arrest: Velocity Harness may be used in Personal Fall Arrest
applications as a component of a Personal Fall Arrest System (PFAS). Structure
must withstand loads applied in the directions permitted by the system of at
least 5,000 lbs. Maximum free fall is 6’, unless used in combination with
equipment explicitly certified for extended free fall. Applicable D-ring: Dorsal.
Restraint: Velocity Harness may be used in Restraint applications. Restraint systems prevent workers from
reaching the leading edge of a fall hazard. Always account for fully deployed length of lanyard/SRL. Structure
must withstand loads applied in the directions permitted by the system of at least 1,000 lbs. No free fall is
permitted. Restraint systems may only be used on surfaces with slopes up to 4/12 (vertical/horizontal).
Applicable D-rings: Dorsal, Chest, Side, Shoulder.
Work Positioning: Velocity Harness, configured with side or shoulder D-rings, may be used in Work Positioning
applications. Work Positioning systems allow a worker to be supported while in suspension and work freely with
both hands. Structure must withstand loads applied in the directions permitted by the system of at least
3,000 lbs. Maximum allowable free fall is 2’. Applicable D-rings: Side.
Rescue/Confined Space: Velocity Harness may be used in Rescue/Confined Space applications. Rescue systems
function to safely recover a worker from a confined location or after exposed to a fall. There are various
configurations of Rescue systems depending on the type of rescue. Structure must withstand loads applied in
the directions permitted by the system of at least 3,000 lbs. No free fall is permitted. Applicable D-rings: Dorsal,
chest, shoulder.
Velocity Harness is suitable for the following applications:
Always follow all manufacturer's instructions for proper adornment and use. Some steps of adorning a harness may
require assistance from another person.
Upon completely adorning a harness, Guardian Fall Protection recommends that another person, with knowledge of the
safe and correct use of the harness, inspect to ensure the harness is being worn correctly.
Materials: polyester and steel.
Core webbing color contrasts with external webbing, which allows for easy determination of damage or exposure to forces
of fall arrest during equipment inspection.
For all applications: worker weight capacity range (including all clothing, tools, and equipment) is 130-420 lbs.
Compliant with all applicable OSHA 1910, OSHA 1926 Subpart M,
ANSI Z359.11-2014, and ANSI A10.32-2012 regulations.
Please contact Guardian Fall Protection for product-specific UPC codes.
Custom configurations available. Contact customer service for details.
Part # Size Description
01700 S - L
Velocity w/ PT Chest & PT Legs
01706
01705
01704
01703
01702
01701
XL - XXL
S - L
XL - XXL
S - L
S - L
XL - XXL
Velocity w/ 3 D-rings, PT Chest & TB Legs
Velocity w/ 3 D-rings, PT Chest & TB Legs
Velocity w/ PT Chest & TB Legs
Velocity w/ PT Chest & TB Legs
Velocity w/ 3 D-rings, PT Chest, & PT Legs
Velocity w/ PT Chest & PT Legs
01750 S - L Surfacetech Web Velocity Harness w/TB Legs
01751 S - L Surfacetech Web Velocity Harness w/TB Legs & Side D-rings
01752
01753
S - L
XL - XXL
Hawk Harness w/ PT Chest & TB Legs
Hawk Harness w/ PT Chest & PT Legs01754
01755
S - L
XL - XXL
Hawk Harness w/ PT Chest & PT Legs
Hawk Harness w/ PT Chest & TB Legs