Item Brochure
Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 phone: (800) 466-6385 fax: (800) 670-7892 www.guardianfall.com
Wire Hook Anchor
ONLY connect to Connection Point with a self-closing and self-locking carabiner; NEVER connect with a
snap hook or other connecting device.
Materials: stainless steel.
Compliant with all OSHA 1910, OSHA 1926 Subpart M,
ANSI Z359.1-2007, and ANSI A10.32-2012 regulations.
Wire Hook Anchor is suitable for the following applications:
MAXIMUM 1 connection per Wire Hook Anchor.
UPC-A Code: 672421018607
Custom configurations not available. Not repairable.
Contact customer service for details.
For all applications: worker weight capacity range
(including all clothing, tools, and equipment) is 130-310 lbs.
Personal Fall Arrest: Wire Hook Anchor may be used to
support a MAXIMUM 1 Personal Fall Arrest System (PFAS)
for use in Fall Arrest applications. Structure must withstand
loads applied in the directions permitted by the system of
at least 5,000 lbs. Maximum free fall is 6‘. Applicable
D-ring: Dorsal.
Restraint: Wire Hook Anchor may be used in Restraint applications. Restraint systems
prevent workers from reaching the leading edge of a fall hazard. Always account for fully
deployed length of lanyard/SRL. Structure must withstand loads applied in the directions
permitted by the system of at least 1,000 lbs. No free fall is permitted. Restraint systems
may only be used on surfaces with slopes up to 4/12 (vertical/horizontal). Applicable
D-rings: Dorsal, Chest, Side, Shoulder.
Part #: 01860