User Manual

Guardian Field Support Manual
2
Fastener - Mounting Arm Assembly Bolts:
Connection: Connects the arm to the mount and
the arm to the ICS module
Size: M6 x 12 T20 Security Torx Head Button
Screw
Adjustment: Allows adjustment of Yaw and Roll
using your T20 driver
Function: Provides position of the ICS to face to
driver depending on dashboard
1
Screw in Hard Mount
Connection: Mounting plate for the ICS
Size: 63mm diameter
Adjustment: Can be orientated for mounting the
screws
Function: To be used in a Hard installation to
screw the ICS to the dashboard
3
Fastener - Self tapping screw
Connection: Used with the Hard Mount
Size: 10 Gauge x 25mm black self-tapping screw
CSK
Adjustment: Use Phillips head to screw in
Function: Used with Screw in hard mount
1
Adhesive Soft mount:
Connection: Mounting plate for the ICS
Size: 110mm diameter
Adjustment: make sure position is correct
before sticking to the dashboard, once down this
cannot be reused. Alcohol wipes must be used.
Seeing Machines tested the strength using 3M
primer. To be covered by SM test standards 3M
primer must be used.
Function: To be used in a Soft installation to
secure the ICS to the dashboard through
adhesion