User Manual

Guardian Field Support Manual – Section 2
25
5.4 COMPONENT INSTALLATION SPECIFICS
5.4.1 SIM CARD INSTALLATION
SIM Card Installation
Important Points to Note:
Activated SIM cards must be provided prior to commencing the install.
The install cannot continue if you do not have activated SIM cards as the system will not be
able to connect to a Network. Confirm with the client, that the SIM has been activated with the
telecommunications provider. You will need to know the APN settings for the supplied SIM card
for use during the Installation Wizard. A Global APN list is available on the TCP if needed.
The customer is to be advised that the install cannot be completed if an active SIM is not
provided.
The SIM card size required is a Nano SIM.
Mounting Location:
The SIM card is to be inserted in the
Controller Unit SIM card tray. You will need
to pull out the tray with your fingernail. The
tray completely comes out of the Controller
Unit. As it is a very small part, extra care
should be taken to not lose the Tray.