User Manual

Guardian Field Support Manual – Section 2
32
Soft Mount:
The Soft Mount uses a strong adhesive
automotive grade double sided tape. The
soft mount can only be used once because
the tape is single use.
If the soft mount is to be used, the Client is
to sign a waiver stating that they understand
the risks associated with this mounting
option. You need to avoid textured, soft or
spongy surfaces where possible.
You must ensure that the attaching surface
has been cleaned. The included Alcohol
wipes are to be used to clean the surface.
When using a soft mount installation, you
must prepare the surface with the following
primer (not supplied by SM):.
- 3M Primer 94 for dash mount.
- 3M Primer AP115 for glass mount.
Note: The primer may cause some damage
to the dash if the mounting plate is removed.
Before sticking the adhesive mount down
ensure that the mount is rotated in such a
way to ensure the maximum amount of
adhesion is achieved as seen in the image