User Manual

Guardian Field Support Manual – Section 2
69
2. Pitch and Yaw using sliders:
Use the slider bars to adjust the Pitch and
Yaw based on the feedback provided by the
live calibration graphs (located to the right of
the live feed). The graph should be at or as
close to zero when you are in the normal
driving position.
Select “Save” any time an adjustment is
made prior to reviewing the calibration
graphs.
The head tracking confidence graph and the
head tracking status must also indicate valid
tracking and tracking confidence percentage
(>70%).
Save changes:
Create Test Events:
First, select ‘Start’. The system will enter
demo mode prompting you to close your
eyes via text in the wizard and an audible
prompt. Create a Fatigue Event (eye
closure). The alarms and seat vibration
should activate.
Tick the boxes to confirm that you heard the
audio and felt the vibration motor.
Click ‘Next’
Use the ‘Repeat’ button to conduct the test
again.
Repeat the same process for a Distraction
Event (head rotation away from forward).
Note - there is a new Calibration graph on
this step to indicate when the On-Road
Direction Calibrator Status has been
successfully configured, it will turn to green
when it is ready for you to conduct the test
via text in the wizard and an audible prompt.
Click ‘Continue’.
Use the ‘Repeat’ button to conduct the test
again if needed.
Once you have created your test events for
each event type, select “Next”. These test
events will be uploaded to Guardian Live as
part of the installation validation process.
Detect Fatigue: