User Manual

Guardian Field Support Manual – Section 2
71
Step 9 – Review
This step confirms that all previous steps are
complete and will indicate if an error has
been detected (yellow or red symbols). If
you see red X’s against any steps, you will
have to return to that step (using the Icon
button on the top or to the left) and conduct
troubleshooting. Alternatively, you can call
24/7 Support for assistance.
If Orange icons are present, they should be
reviewed and corrected (if possible) before
completing the installation. Should you
require assistance, contact Seeing Machines
Support
If everything is ticked Green, click
‘Complete’.
The system has now completed the
installation wizard setup process and will
attempt to upload the installation report.
You can download a copy of the installation
report directly to your computer by selecting
the Download Install Report button. The
document will be downloaded as a .tar.gz
file called
‘SystemSerialNumber_InstallationDateTimes
tamp(UTC)_install_report.tar.gz’.
Once unzipped, the file names are
‘SystemSerialNumber_InstallationDateTimes
tamp(UTC)_InstallReport.json’. These can
be opened via Notepad ++.
If the system was not able to communicate
to the network, the installation report will not
be uploaded as indicated by a red X. You
will need to download the installation report
then upload the file to 24/7 Support
([e-mail]).
The upload of the Install Report is required
to complete the installation validation
process, when it is not automatically
uploaded.
Select “Reboot”.
Install Report
The Software Installation is now complete,
and the Wizard will prompt you to reboot the
system.