Product Manual

Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 phone: [phone] fax: [phone] www.guardianfall.com
ATTACHMENT:
USE:
Install Trauma Strap immediately
above where leg straps meet
side/shoulder straps (as shown).
5. Trauma Strap is now installed
and ready to use.
4. Repeat steps 1-3 on second side.
3. Secure Trauma Strap snap buckle
around harness strap.
2. Pull Trauma Strap pouch through
web loop and choke down to
harness strap. Pouch must be on
outside of harness strap
1. Pass Trauma Strap web loop
behind harness strap and pull
back around.
85283 (Rev. A)
1
Unzip Trauma Strap
pouches fitted on both
sides of the harness.
2
Connect the strap end
to the ring end, and
ensure strap buckle is fully
locked and secured.
3
Put your feet into
the loop that you
have made.
4
Stand on the loop
and examine
pressure on thighs.
5
Adjust strap as
necessary to accommodate
your height.