Item Brochure

Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 phone: [phone] fax: [phone] www.guardianfall.com
Halo Web SRL
May be used in both mobile and stationary applications. For mobile applications, attach SRL carabiner
to harness Dorsal D-ring, and attach snap hook to selected anchorage connector. For stationary
applications, attach SRL carabiner to selected anchorage connector, and attach snap hook to applicable
harness D-ring.
Materials: galvanized steel, stainless steel, aluminum, zinc-plated steel, polyester, and Dyneema.
Compliant with all OSHA 1910, OSHA 1926 Subpart M,
ANSI Z359.14-2014, and ANSI A10.32-2012 regulations.
Halo Web SRL is suitable for the following applications:
MAXIMUM 1 user per Halo Web SRL.
Custom configurations available. Contact customer service for details.
Personal Fall Arrest: Halo Web SRLs may be used in Personal Fall Arrest
applications as a component of a MAXIMUM 1 Personal Fall Arrest
System (PFAS). Structure must withstand loads applied in the directions
permitted by the system of at least 5,000 lbs. No free fall is permitted.
SRL must always be positioned at or above harness dorsal D-ring AND at
or below anchor point. Applicable D-ring: Dorsal.
Restraint: Halo Web SRLs may be used in Restraint applications. Restraint
systems prevent workers from reaching the leading edge of a fall hazard. Always
account for fully deployed length of SRL. Structure must withstand loads applied
in the directions permitted by the system of at least 1,000 lbs. No free fall is
permitted. Restraint systems may only be used on surfaces with slopes up to
4/12 (vertical/horizontal). Applicable D-rings: Dorsal, Chest, Side, Shoulder.
NEVER for use in Leading Edge (LE) applications.
In Fall Arrest applications, anchorage connection point must always be at or above harness dorsal
D-ring (from a standing position).
For all applications: worker weight capacity range
(including all clothing, tools, and equipment) is 130-310 lbs.*
* Maximum capacity may be increased to 420 lbs. if used in combination
with the Guardian Shock Absorber Extension (part # 01205).
Part # Length
Description
10900
10901
11’
11’
1” Nylon Webbing w/Carabiner, Swivel Top, & Snap Hook
10909
20900
20’
8’
10900-AR
11’
1” Nylon Webbing w/Aluminum Carabiner, Swivel Top, & Aluminum Snap Hook
1” Nylon Webbing w/Carabiner, Swivel Top, & Rebar Hook
1” Nylon Webbing w/Carabiner, Swivel Top, & Snap Hook
1” Nylon Webbing w/Carabiner, Swivel Top, & Snap Hook
20907 7’ 1” Nylon Webbing w/Carabiner, Swivel Top, & Snap Hook