Item Brochure

Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 phone: [phone] fax: [phone] www.guardianfall.com
Seraph Harness w/Sternal D-ring
Materials: polyester and galvanized steel.
Compliant with all OSHA 1910, OSHA 1926 Subpart M,
ANSI Z359.1-2007, and ANSI A10.32-2012 regulations.
Seraph Harness is suitable for the following applications:
Restraint: Seraph Harness may be used in Restraint applications. Restraint systems prevent workers from
reaching the leading edge of a fall hazard. Always account for fully deployed length of lanyard/SRL. Structure
must withstand loads applied in the directions permitted by the system of at least 1,000 lbs. No free fall is
permitted. Restraint systems may only be used on surfaces with slopes up to 4/12 (vertical/horizontal).
Applicable D-rings: Dorsal, Chest, Side, Shoulder.
Work Positioning: Seraph Harness, configured with side or shoulder D-rings, may be used in Work Positioning
applications. Work Positioning systems allow a worker to be supported while in suspension and work freely
with both hands. Structure must withstand loads applied in the directions permitted by the system of at least
3,000 lbs. Maximum allowable free fall is 2’. Applicable D-rings: Side.
For all applications: worker weight capacity range (including all clothing, tools, and equipment) is 130-420 lbs.
Rescue/Confined Space: Seraph Harness may be used in Rescue/Confined Space applications. Rescue systems
function to safely recover a worker from a confined location or after exposed to a fall. There are various
configurations of Rescue systems depending on the type of rescue. Structure must withstand loads applied in
the directions permitted by the system of at least 3,000 lbs. No free fall is permitted. Applicable D-rings:
Dorsal, Chest, Shoulder, Sternal.
Please contact Guardian Fall Protection for product-specific UPC codes.
Always follow all manufacturer's instructions for proper adornment and use. Some steps of adorning a harness may require
assistance from another person. Upon completely adorning a harness, Guardian Fall Protection recommends that another
person, with knowledge of the safe and correct use of the harness, inspect to ensure the harness is being worn correctly.
Personal Fall Arrest: Seraph Harness may be used
to support a MAXIMUM 1 Personal Fall Arrest System
(PFAS) for use in Fall Arrest applications. Structure
must withstand loads applied in the directions
permitted by the system of at least 5,000 lbs.
Maximum free fall is 6‘, or up to 12’ if used in
combination with equipment explicitly certified for
such use. Maximum free fall for Sternal D-ring is 2’.
Applicable D-ring: Dorsal, Sternal.
For part-specific description, configuration, color, and size,
please visit www.guardianfall.com or contact our customer
service department at 800-466-6385.