Product Manual

Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 phone: [phone] fax: [phone] www.guardianfall.com
5
#61029
2” x 4” board perpendicular to work surface.
(4) Fasteners must be fully embedded into side wall.
• Fasteners for wood: ¼” x 2“ lag bolts.
• Fasteners for metal: ¼” x 2“ lag bolts.
• Fasteners for concrete:
5/16” x 2” Hex Head Tapcon screws.
#61140
(4) Fasteners must be fully embedded substrate.
• Fasteners for wood: ¼” x 2“ lag bolts.
• Fasteners for metal: ¼” x 2“ lag bolts.
• Fasteners for concrete: 5/16” x 2” Hex Head Tapcon screws.
Guardrail posts and rails installed in a
manner compliant with requirements
specified by this manual.
#61141
(4) Fasteners must be fully embedded substrate.
• Fasteners for wood: ¼” x 2“ lag bolts.
• Fasteners for metal: ¼” x 2“ lag bolts.
• 3/16” x 1¾” Hex Head Tapcon screws.
2” x 4” board inserted vertically in each
Guardrail Receiver, and secured on each side with
compatible fastener.
Toeboard installed in applicable location
of Guardrail Receiver. Use compatible
fastener to hold in place.