Product Manual

Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 phone: [phone] fax: [phone] www.guardianfall.com
11 85088 (Rev. D)
Labels
Capacity range: 130-420 lbs.
(including all equipment).
Trench Box Anchor
!
WARNING
Prior to use, read and understand
all instructions provided at time of
shipment from manufacturer.
Part #: 15192
Compliant with all OSHA 1910, OSHA
1926 Subpart M, ANSI Z359.18-2017,
and ANSI A10.32-2012 regulations.
5,000 lb. MBS (min. breaking strength).
ONLY make connections to Trench Box
Anchor Mast. NEVER connect to
guardrails or any other
component of this system.
All connections must be selected
and deemed compatible with Trench
Box Anchor by Competent Person.
MAXIMUM 1 connection per anchor mast.
DOM:
Materials: galvanized steel.
90073 (Rev. C)
1-800-466-6385 • www.guardianfall.com
Serial #:
Avoid contact with hazards, including,
but not limited to, heat, chemicals,
electricity, and sharp or abrasive
edges and surfaces.
Type A anchorage connector.
Minimum service temperature: -30° F.
DO NOT REMOVE LABELS
If equipment fails inspection
IMMEDIATELY REMOVE FROM SERVICE
User must inspect prior to EACH use. Competent Person must complete
formal inspection every 12 months. Competent Person to inspect and initial.
INSPECTION GRID
Date of First Use: __________________. Product lifetime is indefinite
as long as it passes pre-use and Competent Person inspections.
YR J F M A M J J A S O N D
20____
20____
20____
20____
20____
!
WARNING
Trench Box
Guardrail Receiver
Part #: 15193
Compliant with all OSHA 1910 and 1926 Subpart M regulations.
Prior to use, read and understand all instructions
provided at time of shipment from manufacturer.
Adjusts to fit trench walls up to 10” thick.
Materials:
galvanized steel.
Install guardrail posts with rungs facing AWAY from fall hazard.
NEVER climb or lean on guardrails.
NEVER make any connections to Trench Box Guardrail Receiver.
Guardrails must be 2”x4” or 2“x6” lumber, or compatible
snap-on rails. Lumber guardrails must overlap minimum 12”.
Maximum spacing of Trench Box Guardrail Receivers: 10’.
Ensure top-rail is 42” (+/- 3”) above work surface.
90943 (Rev. A)
1-800-466-6385 • www.guardianfall.com
Serial #:
DOM: