Product Manual

Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 phone: [phone] fax: [phone] www.guardianfall.com
7
Adjustment
Clamps
Fall Hazard
3. Tighten (2) provided assembly bolts with 3/4” wrench until snug.
4. Tighten both Adjustment Clamps until snug. Adjustment Clamps must lie flush against trench box wall.
5. Install Anchor Mast. Insert (2) provided bolts, attach nuts to bolts, and tighten with 3/4” wrench until snug.
Anchor Mast must not move after installation.
Anchor Mast
Bolts
Assembly
Bolts
Trench Box Anchor:
1. Adjust Trench Box Anchor to fit trench box wall thickness (maximum 10” width).
2. Place Trench Box Anchor over trench box wall with Adjustment Clamps facing away from fall hazard.