Product Manual

Introduction
Thank you for purchasing a Guardian Fall
Protection Screw-Down G-Rail Base. This
manual must be read and understood in
its entirety, and used as part of an
employee training program as required
by OSHA or any applicable state agency.
This and any other included instructions
must be made available to the user of the
equipment. The user must understand how
to safely and effectively use the
Screw-Down G-Rail Base, and all fall safety
equipment used in combination with the
Screw-Down G-Rail Base.
User Information
Date of First Use:
Serial #:
Trainer:
User:
Applicable Safety Standards
When used according to instruction specifications, this product meets or exceeds all applicable OSHA 1926
Subpart M and OSHA 1910 standards for fall protection. Applicable standards and regulations depend on the
type of work being done, and also might include state-specific regulations. Consult regulatory agencies for
more information on fall protection systems and associated components.
Worker Classifications
!
CAUTION
Understand the following definitions of those who
work near or who may be exposed to fall hazards.
Qualified Person: A person with an accredited degree or certification, and with extensive experience or
sufficient professional standing, who is considered proficient in planning and reviewing the conformity of fall
protection and rescue systems.
Competent Person: A highly trained and experienced person who is ASSIGNED BY THE EMPLOYER to be
responsible for all elements of a fall safety program, including, but not limited to, its regulation, management,
and implementation. A person who is proficient in identifying existing and predictable fall hazards, and who
has the authority to stop work in order to eliminate hazards.
Authorized Person: A person who is assigned by their employer to work around or be subject to potential or
existing fall hazards.
It is the responsibility of a Qualified or Competent person to supervise the job site and ensure all
applicable safety regulations are complied with.
Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 phone: [phone] fax: [phone] www.guardianfall.com
1
Product Specific Applications
Fall Prevention: Screw-Down G-Rail Base may be used as a component in Fall Prevention
applications ONLY. Fall Prevention Systems are placed around the leading edges of any and all
fall hazards to prevent a worker from going over an edge, and may be used in substitute of
Fall Protection or safety netting systems. Installation requirements for Screw-Down G-Rail Base
set forth in this manual MUST be adhered to. Personal Fall Arrest, Work Positioning, Climbing,
Rescue, and any other systems must NEVER be connected to Fall Prevention Systems.