Product Manual

Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 phone: [phone] fax: [phone] www.guardianfall.com
3
Prior to EACH use, inspect Screw-Down G-Rail Base for deficiencies, including, but not limited to, corrosion,
deformation, pits, burrs, rough surfaces, sharp edges, cracking, rust, paint buildup, excessive heating,
alteration, and missing or illegible labels. IMMEDIATELY remove Screw-Down G-Rail Base from service if defects
or damage are found. Ensure that applicable work area is free of all damage, including, but not limited to,
debris, rot, rust, decay, cracking, and hazardous materials.
At least every 12 months, a Competent Person other than the user must inspect Screw-Down G-Rail Base.
Competent Person inspections MUST be recorded in inspection log in instruction manual. The
Competent Person must sign their initials in the box corresponding to the month and year the
inspection took place.
During inspection, consider all applications and hazards Screw-Down G-Rail Base has been subjected to.
Inspection
Inspection Log
Date of First Use: __________________.
Product lifetime is indefinite, as long as it passes
pre-use and Competent Person inspections. User
must inspect prior to EACH use. Competent Person
other than user must complete formal inspection
at least every 12 months. Competent Person to
inspect and initial.
This inspection log must be specific to one Screw-Down G-Rail Base. Separate inspection logs must be
used for each Screw-Down G-Rail Base. All inspection records must be made visible and available to all
users at all times.
If equipment fails inspection IMMEDIATELY REMOVE FROM SERVICE.
85348 (Rev. A)
Labels
90923 (Rev. A)
Screw-Down
G-Rail Base
Part #: 15220
DOM:
Serial #: