Product Name: C-Slab Grabber Part #: 15500 Instruction Manual Do not throw away these instructions! Read and understand these instructions before using equipment! Introduction 1 Applicable Safety Standards 1 Worker Classifications 1 Product Specific Applications 2 Components and Specifications 2 Installation and Use 3-4 Maintenance, Cleaning, and Storage 4 Inspection 4 Inspection Log 5 Safety Information 5-6 Labels 7
User Information Date of First Use: Serial #: Trainer: User: Applicable Safety Standards When used according to instruction specifications, this product meets or exceeds all applicable OSHA 1926 Subpart M and OSHA 1910 standards for fall protection. Applicable standards and regulations depend on the type of work being done, and also might include state-specific regulations. Consult regulatory agencies for more information on personal fall arrest systems and associated components.
www.guardianfall.com phone: (800) 466-6385 fax: (800) 670-7892 6305 S. 231st St., Kent, WA 98032 Guardian Fall Protection Product Specific Applications ! WARNING Use of equipment in unintended applications may result in serious injury or death. NEVER make any connections to guardrail systems. C-Slab Grabbers may be used in Fall Prevention applications ONLY.
1. Selected work area must be free of all hazards, including, but not limited to, debris, rot, decay, cracking, and hazardous materials. NEVER install C-Slab Grabbers on gravel or other loose or slippery surfaces. Guardrail systems must be installed a MINIMUM 10’ from power lines and all other electrical hazards. 2. All guardrails MUST be 2” x 4“ or 2” x 6“ construction grade lumber OR wire cabling with strength and installation deemed compatible by a Competent Person.
www.guardianfall.com phone: (800) 466-6385 fax: (800) 670-7892 6305 S. 231st St., Kent, WA 98032 Guardian Fall Protection C-Slab Grabbers MUST be installed flush against substrate, and must allow guardrail posts to be positioned perpendicular to work surface. Concrete substrate MUST be deemed compatible with C-Slab Grabbers by a Competent Person.
This inspection log must be specific to one C-Slab Grabber. Separate inspection logs must be used for each C-Slab Grabber. All inspection records must be made visible and available to all users at all times. If equipment fails inspection IMMEDIATELY REMOVE FROM SERVICE. Safety Information ! WARNING Failure to understand and comply with safety regulations may result in serious injury or death.
www.guardianfall.com A pre-planned rescue procedure in the case of a fall is required. The rescue plan must be project-specific. The rescue plan must allow for employees to rescue themselves, or provide an alternative means for their prompt rescue. Store rescue equipment in an easily accessible and clearly marked area. Training of Authorized Persons to correctly erect, disassemble, inspect, maintain, store, and use equipment must be provided by a Competent Person.
www.guardianfall.com • DO NOT adjust to more than 36” opening • Use 2x4, 2x6, or cable for rails • Use 2x4 for toe boards • Fasten all handrails and toe boards securely • Meets or exceeds OSHA standards for Guardrails CALL 1.800.466.6385 FOR DETAILS www.guardianfall.com FOR CONCRETE USE ONLY !! 90009 (Rev.