Item Brochure

Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 phone: [phone] fax: [phone] www.guardianfall.com
Halo Series Harness
Personal Fall Arrest: Halo Series Harness may be used in Personal
Fall Arrest applications as a component of a Personal Fall Arrest
System (PFAS). Structure must withstand loads applied in the
directions permitted by the system of at least 5,000 lbs. Maximum
free fall is 6’, unless used in combination with equipment explicitly
certified for extended free fall. Applicable D-ring: Dorsal.
Restraint: Halo Series Harness may be used in Restraint applications.
Restraint systems prevent workers from reaching the leading edge of
a fall hazard. Always account for fully deployed length of lanyard/SRL.
Structure must withstand loads applied in the directions permitted by
the system of at least 1,000 lbs. No free fall is permitted. Restraint
systems may only be used on surfaces with slopes up to 4/12
(vertical/horizontal). Applicable D-rings: Dorsal, Chest, Side, Shoulder.
Work Positioning: Halo Series Harness, configured with side or
shoulder D-rings, may be used in Work Positioning applications. Work
Positioning systems allow a worker to be supported while in suspension
and work freely with both hands. Structure must withstand loads
applied in the directions permitted by the system of at least
3,000 lbs. Maximum allowable free fall is 2’. Applicable D-rings: Side.
Rescue/Confined Space: Halo Series Harness may be used in
Rescue/Confined Space applications. Rescue systems function to safely
recover a worker from a confined location or after exposed to a fall. There
are various configurations of Rescue systems depending on the type of
rescue. Structure must withstand loads applied in the directions permitted
by the system of at least 3,000 lbs. No free fall is permitted. Applicable
D-rings: Dorsal, chest, shoulder.
Product-Specific Applications:
Always follow all manufacturer's instructions for proper donning and use. Some steps of donning a harness may require
assistance from another person.
Upon completely donning a harness, Guardian Fall Protection recommends that another person, with knowledge of the
safe and correct use of the harness, inspect to ensure the harness is being worn correctly.
Materials: polyester, nylon, aluminum, and galvanized steel.
For all applications: worker weight capacity range (including all clothing, tools, and equipment) is 130-420 lbs.
Compliant with all applicable OSHA 1910, OSHA 1926 Subpart M,
ANSI Z359.11-2014, and ANSI A10.32-2012 regulations.
Contact Guardian Fall Protection for individual harness model part #s, descriptions, and UPC codes.
Maximum 1 connection per Halo Series Harness.
Custom configurations available. Not repairable. Contact customer service for details.
Made in the USA!