Item Brochure

Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 phone: [phone] fax: [phone] www.guardianfall.com
Stacker Bracket System
Materials: powder-coated steel.
Compliant with all applicable OSHA 1910 and OSHA 1926 Subpart M regulations.
Stacker Bracket System is suitable for the following applications:
Fall Prevention: The Stacker Bracket System may be used in
Fall Prevention applications ONLY. Fall Prevention Systems are
placed around the leading edges of any and all fall hazards to
prevent a worker from going over an edge, and may be used
in substitute of Fall Protection or safety netting systems.
Installation requirements for the Stacker Bracket System set
forth in this manual MUST be adhered to. Personal Fall Arrest,
Work Positioning, Climbing, Rescue, and any other systems
must NEVER be connected to Fall Prevention Systems.
Top Clamp:
• #61146, for 2” x 4” rails.
• #61147, for 2” x 5” rails.
• #61148, for 2” x 6” rails.
• #61149, for 2” x 8” rails.
• #61144, for 2” x 12” rails.
Guardrail Post (#61133): Support Bracket (#61129):
End Rail (#61128):
Full Stacker
Bracket Assembly
Indoor Hanger Bracket (#61038):
Toeboard Attachment (#61142):
Lowering Strap
Support Brackets or Indoor Hanger Brackets MUST be spaced no more than 8’ apart.
MAXIMUM 2 workers or 500 lbs. per successive pair of brackets.
All components of the Stacker Bracket System MUST be placed on an even plane.
For planks, use (2) 2” x 10”, 10’ long construction grade lumber planks per successive
pair of brackets. For guardrails, use (3) 2” x 4” construction grade lumber rails, or
(3) snap-on metal adjustable guardrails.