Item Brochure

Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 phone: [phone] fax: [phone] www.guardianfall.com
Debris Netting
Materials: Polyethylene, stainless steel, and plastic.
Compliant with all OSHA 1910 and OSHA 1926 Subpart M regulations.
Compliant with NFPA 701 Fire Tests for Flame Propagation of Textiles and Films.
UPC-A Codes:
70001: 6 7242170001 4 70002: 6 7242170002 1 70003: 6 7242170003 8
70004: 6 7242170004 5 70005: 6 7242170005 2 70006: 6 7242170006 9
70007: 6 7242170007 6 70008: 6 7242170008 3 70009: 6 7242170009 0
70010: 6 7242170010 6 70014: 6 7242170014 4 70015: 6 7242170015 1
Not repairable.
Remove from service
if exposed to forces
of fall arrest.
Debris Netting Netting Plate Netting Clip
Debris Netting may be used in Fall Prevention applications
ONLY. Fall Prevention Systems are placed around the leading
edges of any and all fall hazards to prevent a worker from
going over an edge, and may be used in substitute of Fall
Protection systems. Installation requirements for Debris
Netting set forth in this manual MUST be adhered to.
Personal Fall Arrest, Work Positioning, Climbing, Rescue,
and any other systems must NEVER be connected to Fall
Prevention Systems.
Surfaces more than 6’ above lower levels require the use
of a Fall Prevention or Fall Protection system.
Part #: 70001; 70002; 70003; 70004; 70005; 70006; 70007; 70008;
70009; 70010; 70014; 70015
Always set-up, install, and use Debris Netting according to manufacturer’s instructions.
Custom configurations available. Contact customer service for details.