SDS

Safety Data Sheet
According to HCS-2012 APPENDIX D TO §1910.1200
Version: 2.0/EN
Revision date: 2018.01.01
Product name: Lithium metal battery
Issue date: 2018.09.25
Report No.: NCT18036089S1-1 Page 6 of 9
TRF: SDS-V2 Version Date : 2018-01-01
Skin and body Protection:
Not necessary under normal conditions, Wear protective gloves and protective
clothing such as long sleeved clothing, impervious gloves, chemical resistant apron,
and antistatic boots if handling an open or leaking battery.
Respiratory Protection:
Not necessary under normal conditions. If exposure limits are exceeded or irritation
is experienced, ventilation and evacuation may be required.
Hygiene Measures:
Handle in accordance with good industrial hygiene and safety practice. Avoid contact
with skin, eyes or clothing. Wear suitable gloves and eye/face protection. Do not eat,
drink, or smoke in work area. Maintain good housekeeping.
9. Physical and chemical properties
(a) Appearance
White & Black & Red Solid
(b) Odor
Odorless
(c) Odor threshold
No data available.
(d) pH
No data available.
(e) Melting point/freezing point
No data available.
(f) Initial boiling point and boiling range
No data available.
(g) Flash point
No data available.
(h) Evaporation rate
No data available.
(i) Flammability
No data available.
(j) Upper/lower flammability or explosive limits
No data available.
(k) Vapor pressure
No data available.
(l) Vapor density
No data available.
(m) Relative density
No data available.
(n) Solubility(ies)
Insoluble in water.
(o) Partition coefficient: n-octanol/water
No data available.
(p) Auto-ignition temperature
No data available.
(q) Decomposition temperature
No data available.
(r) Viscosity
No data available.
10. Stability and reactivity
(a) Reactivity
Stable under recommended storage and handling conditions.
(b) Chemical stability
Stable under normal conditions.
(c) Possibility of hazardous reactions
When heated above 150°C the risk of rupture occurs. Due to special safety construction, rupture implies controlled
release of pressure without ignition.
(d) Conditions to avoid
Do not subject the battery to mechanical shock. Keep away from open flames, high temperature.
(e) Incompatible materials