User Manual

12
MOUNTS WITH ADHESIVE TAPE
How to apply the adhesive tape (IMPORTANT!)?
• Apply the tape 24 hours before use in a room temperature around 21°C
• Make sure the surface you want to apply the tape on is smooth: the tape will not
adhere properly on an embossed or porous surface.
• Clean and dry the surface before application.Anycleanerthatwillnotleavealmor
oily surface can be used!
• Pressthetapeentirelyandrmlyintoplace!
How to remove the adhesive tape?
The adhesive tape can be removed by using a hairdryer: the heated air will loosen the
adhesive part.
Remove the residue with a cleaner or with alcohol.
A. CURVED SURFACE MOUNT
Stick the 3M VHB tape to the mount and place/stick the mount on a curved surface.
Note: this mount can also be used with the remote control’s strap!