User Manual

6. SETTING DATE AND TIME

To set correct date and time, please follow these steps:

• Long press MENU button (5 or 7) to open the menu

• Press Mode button (6) to switch to the system settings menu

• UsetheWiButton(7)andMODEButton(6)until‘Date&Time’

• Press Record Button (1) to select ‘Date & Time’

• AdjustdateandtimebyusingtheWiButton(7)andMODEButton(6)(changedigits)

and the Mode Button (6) (swap to month, date, hour, …)

Start video recording:

• Make sure the Guardo Action Cam 4 is turned on and in Video Mode.

• Press the Record Button (1) once. The red LED indicator (12) and ‘REC’ will start

ashingslowlyandatimerwillappear=startofrecording.

Note:

• Shooting view angles are slightly different in different working modes of the video

camera.

• Topausethevideorecording,presstheMENU/WiButton(7)1xshortly.

Stop video recording:

• Press the Record Button (1) once again to stop recording. The red LED indicator (12)

and the timer will turn off.

Note:

• When the memory card is full, the Guardo Action Cam 4 will automatically stop

recording. Your recordings will be saved, before the camera turns off! When 0:00

ashesonyourscreen,thisindicatesyourSDcardisfullandrecordingisnolonger

possible. You need to empty or format your SD card (via computer or camera) again.

This of course after having copied/saved your photos/footage from the card to another

device such as your computer’s hard disk. See

‘Format SD Card’.

• When recording continuously over a longer period of time (e.g. 2 hours non-stop), the

footage saved on your Micro SD Card will be split in different sections, 1 section =

max. 4GB/45 min.

OPERATION