User Manual

9
To charge the battery:
1. Make sure the Guardo Action Cam 4 is turned off and that the battery is installed.
2. Connect the micro USB cable (14) to the Micro USB Port (8) of the Guardo Action
Cam 4.
3. Connect the other end of the micro USB cable (14) to the USB port of your computer or
the optional Guardo USB home charging device, optionally available on www.guardo.be.
4. During charging, the blue LED indicator (11) at the front of the camera will light
continuously. When charging is completed the blue LED indicator (11) will turn off.
Note:
• The camera can be used while charging.
• When the battery runs out of power, the Guardo Action Cam 4 will turn off but will
save the part that was recorded until the camera turned off.
• When the camera is ON but not in use it will automatically turn off after 5 min. This is
the default setting and can NOT be changed in the camera’s menu.
• WhentheblueLEDindicatorwillashinsteadoflightcontinuously,thismeansthat
there is no battery inside the camera.
• ThedeliveredmicroUSBcable(14)offersfastandefcientchargingbutisalsoused
for synchronizing and data transfer with your PC.
• Extra charging devices/accessories can be ordered from our website:
www.guardo.be.
• If the video camera is not used for a long time, remove and store the battery properly
and periodically recharge it to ensure battery performance.
CHARGING THE BATTERY