Operation Manual

FP 600 PLUS I • FP 700 PLUS
GB
27
ENGLISH
• Check all screw and plug-in connections and pro-
tective equipment if rm and tightened properly
and whether all moving parts are running smooth
whenever the appliance is to be put into operation.
• Prior to every use, visually check the machine to
rule out any defects, in particular on the power
cable and the plug.
• Before pressing On/O, make sure the saw blade
has been tted properly.
At all times, keep the machine, ventilation slots, in
particular, clean. The sawdust ejection and/or dust ex-
hauster should be cleaned at regular intervals. Never
spray water on the machine!
All moving parts should be treated with environmen-
tal-friendly oil. Never use any grease!
Check the wear of the saw blade. Blunt saw blades
must be sharpened. Clean saw blades covered with
resin.
The ball bearings of the saw shaft are protected
against dust and are therefore service-free, i.e. the
bearings need not be lubricated.
Repairs and works specied in these Instructions may
only be performed by qualied authorised sta.
Use only original accessories and original spare parts.
Only a regularly maintained and treated appliance
can serve as a satisfactory aid. Insucient mainte-
nance and care can lead to unforeseen accidents and
injuries.
Deactivation and disposal
If the machine can no longer be used and it is to be
disposed, it must be deactivated and disassembled, i.e.
it must be put to a state in which it may not be used for
purposes for which it has been designed. The process
of disposal must consider the recovery of basic materi-
als of the machine. These materials can be potentially
reused in the recycling process. The manufacturer re-
jects any liability for any personal or property damage
incurred as a result of reuse of parts of the machine if
such parts are used for purpose other than the original
respective purpose. Machine deactivation: Each pro-
cess of deactivation or disposal must be performed by
sta trained for this purpose.
• The machine is disintegrated into parts.
• Block each moving part of the machine.
• Each machine element should be delivered to
certied collection centres.
• Rubber parts should be removed from the machine
and delivered to a rubber parts collection centre.
• There is no other residual risk after deactivation and
blocking of the moving parts.
• Electrical structural elements are a special waste and
need to be disposed separately from the machine.
Approved extinguishers (e.g. powder extinguisher)
need to be used in case of re of the electrical
equipment of the machine.
Guarantee
Guarantee claims as per guarantee card attached.
The guarantee solely covers inadequacies caused
by material defect or manufacturing defect. Original
payment voucher with the sales date needs to be sub-
mitted for any claim in the guarantee period.
The guarantee does not cover any unauthorised
use such as appliance overloading, use of violence,
damage as a result of any unauthorised interference
or caused by foreign items. Failing to follow the ope-
rating and assembly instructions and common wear
are also not included in the guarantee..
Service
Do you have any technical questions? Any claim? Do
you need any spare parts or operating instructions?
We will quickly help you and without needles bure-
aucracy at our web pages at www.guede.com in the
Servicing part. Please help us be able to help you. In
order to identify your device in case of claim we need
the serial No., product No. and year of production. All
this data can be found on the type label. Please enter
it here for future reference:
Serial No.:
Art. No:
Year of production: