Operation Manual

Introduction
To enjoy your new appliance as long as possible, please
read carefully the Operating Instructions and the attached
safety instructions before putting it into operation. Further,
we recommend keeping the Operating Instructions in order
to recall the product features in the future. To follow the
continuous product development. we reserve the right to
make technical changes for any further improvement.
This document represents the original Operating
Instructions.
Appliance description
Professional and high-performance hot-air turbine for
heating and drying in the building industry, agriculture and
storage spaces.
To be used in well ventilated spaces only!
Heating system using oil. The appliance is fitted with an
electronic ignition system. High-quality steel body with
robust chassis and light run.
Unpacking
Remove all the packing materials that have been used to
pack the heating unit for transport purposes.
Take the heating unit out of the box.
Check the heating unit for any damage caused during
transport. If the heating unit is damaged, contact
immediately the seller where the appliance has been
bought.
Appliance description (pic. A)
A． Hot air outlet
B． Appliance body
C． Handle
D． Fireplace
E． Cable winding-up
F． Bottom cover
G． Tank level indicator
H． Fuel tank
I． Wheel
J． Side cover
K． Digital temperature indicator
L． Temperature controller/thermostat
M． ON/OFF switch with indicator
N． Bottom tube frame
O． Tank opening/lid
P． Fuel filter
Q． Pump with geared wheel
R． Fan with protective grid
a. Thermostat controller
b. Required temperature indicator
c. Actual/room temperature indicator
d. ON/OFF switch
Technical specifications
GD 30 lK
Voltage/frequency: 230 V~50 Hz
fan motor power: 250 W
Heating output: 30 kW/25.800 kcal./h
Turbine output: 760 m
3
/h
Tank capacity: 50 l
Fuel consumption: ca. 2,4 l/h
Fuel: Oil
Feeder cable length: 1,6 m
Net/gross weight: 39,8 kg / 35,5 kg
Order No. 85110
GD 50 lK
Voltage/frequency: 230 V~50 Hz
fan motor power: 650 W
Heating output: 50 kW/43.000 kcal./h
Turbine output: 2000 m
3
/h
Tank capacity: 68 l
Fuel consumption: ca. 4,0 l/h
Fuel: Oil
Feeder cable length: 1,2 m
Net/gross weight: 62,2 kg / 56,4 kg
Order No. 85111
General safety instructions
Please read carefully these Operating Instructions.
Familiarise with the control elements and appropriate
appliance using. Keep the Operating Instructions for future
reference.
Safe working
Keep the place of your work clean!
Mess in the place of your work may result in injuries.
Consider the environment influences
Do not expose the appliance to rain.
Do not use the appliance in a wet or moist environment.
Provide appropriate lighting.
Do not use the appliance near flammable liquids or gases.
Keep other persons in safe distance!
Do not let other persons, especially children, touch the
appliance and the cable. Keep them in a sufficient distance
from the place of your work.
Store the appliance properly!
An appliance that is not used should be stored in a dry,
locked place out of reach of children.
Do not overload the appliance!
Work in the specified output limits.
Use the right appliance!
Do not use the appliance for purposes for which it has not
been designed.
Look after your appliance!
Follow the maintenance regulations and instructions.
Check regularly the appliance cable and have it replaced
by an authorised professional if damaged.
Check regularly the extension cable and replace it if
damaged.
Be careful!
Pay attention to what you are doing. Use common sense
when working. Do not use the appliance when you are
tired.
WARNING!
Use of any other accessories may pose a risk of injury.
Your appliance should be repaired by an electrician
only!
This appliance meets the appropriate safety provisions.
Repairs may only be executed by an electrician and
original spare parts must be used, otherwise the user may
face a risk of injury
11