Operation Manual

15
GESF 260
Defects searching
Symptom Possiblecause Removal
Enginenotstarting Feedercable is notconnected or is faulty Checkthecable, plug it orreplace it
orhave it repairedby aprofessional
ifnecessary.
Housewiring fuse isoverloaded Switchthe fuseon or use ahousecon-
nection withhigherprotection orhave it
installedby aprofessional.
Wrongswitch/plugcombination Haveit repairedby anauthorisedshop.
Enginemum-
blingbutnot running
Blowerworm or ejectchannel is blocked. Unplugtheappliance,remove theblo-
cking, waitfor app. 10minutes andstart
theappliance again.
Abnor-
malsound(grum-
bling,rattling,clatter)
Screws,nuts or othertightening compon-
entsare loose.
Tightenthecomponents.Ifthe abnor-
malsound persists,contactimmediately
anauthorisedshop.
Shaking,vibrations Loosecomponents orthe blower worm
isdamaged.
Stopthe engine. Unplug theappliance.
Havethe damagedblower wormre-
paired.Tighten anyloose screwsand
nuts.
Appliancenotremo-
vingsnow
Blowerworm or ejectchannel is blocked. Stopthe engine. Unplug theappli-
ance.Remove theblocking.
V-beltis loose orbroken. Havethe V-beltchecked in anauthori-
sedshop.
ENGLISH
GB
Güde 94567 Schneefräse_1.0.indd 15 01.03.12 11:16