Operation Manual

20
GB
ENGLISH
Failure removal
Defect
Cause
Measure
Load to be lifted must
not be moved using the
car lifter.
The bleeder screw has not been tighte-
ned properly.
Tighten the bleeder screw.
8
Oil level too low.
Add oil.
11
The car lifter cannot
hold load in a lifted
position.
Oil level too low.
Check the oil level or, as appropriate,
add some.
11
Air in the device.
Car lifter bleeding
10
Hydraulics cannot be
extended in full.
Oil level too low.
Check the oil level or, as appropriate,
add some.
11
Air in the device.
Car lifter bleeding
10
Hydraulics cannot be
lowered to full extent.
Oil level too low.
Check the oil level or, as appropriate,
add some.
11
Air in the device.
Car lifter bleeding
10
The return spring is worn out or
unhooked.
Have the return spring replaced by a
professional.