Operation Manual

D
25
GB
ENGLISH
Technical Data
Bench drill GTB 20/812 GTB 20/812 R+L GSB 20/812 GSB 20/812 R+L
Art. No 55206 55208 55210 55212
Mains voltage 230 V 400 V 230 V 400 V
Mains frequency 50 Hz 50 Hz 50 Hz 50 Hz
Safety class I I I I
Motor power 800 W 800 W 800 W 800 W
Spindle stroke 80 mm 80 mm 80 mm 80 mm
Spindle speed 210-2500 min
-1
210-2500 min
-1
210-2500 min
-1
210-2500 min
-1
Number of steps 12 12 12 12
Reach 169 mm 169 mm 169 mm 169 mm
Drill chuck range 1-16 mm 1-16 mm 1-16 mm 1-16 mm
Drill chuck cone B16 B16 B16 B16
Spindle receiver MK 2 MK 2 MK 2 MK 2
max. Drilling capacity in steel 16 mm 16 mm 16 mm 16 mm
Diameter of bench 260 x 260 mm 260 x 260 mm 260 x 260 mm 260 x 260 mm
Base plate WxD 240 x 410 mm 240 x 410 mm 240 x 410 mm 240 x 410 mm
Diameter of columns 70 mm 70 mm 70 mm 70 mm
Length of connecting cable 1,8 m 1,8 m 1,8 m 1,8 m
Type of cable H05VV-F H05VV-F H05VV-F H05VV-F
Length 650 mm 650 mm 630 mm 630 mm
Width 340 mm 340 mm 370 mm 370 mm
Height 1010 mm 1010 mm 1580 mm 1580 mm
Net/gross weight 48 / 51 kg 48 / 51 kg 53 / 56 kg 53 / 56 kg
Noise details
Sound pressure level L
pA
58 dB (A) 63,4 dB (A) 58 dB (A) 63,4 dB (A)
Sound power level L
WA
71 db (A) 76,3 db (A) 71 db (A) 76,3 db (A)
Wear ear protectors!
The numerical values given are emission levels and not necessarily safe working levels. Although there is a
correlation between the emission levels and the acceptable exposure levels, they cannot be reliably used to
determine whether or not any additional safety measures are necessary. The characteristics of the work space,
other sources of noise, i.e. the number of machines and other processes running in the vicinity and so on, are all
factors that can inuence the actual exposure levels of the employees. Moreover, the acceptable exposure levels
can vary from country to country. This information should enable the machine‘s operator to carry out a better
assessment of the risks and hazards.
In case of any doubts about connection and operati-
on refer please to our customer center
Specied Conditions Of Use
Bench drilling machine for light and medium drilling
work in wood, metals and plastics.
The machine may only be used in a technically
perfect condition and taking into account all safety
information.
Do not use this product in any other way as stated
for normal use. Not observing general regulations
in force and instructions from this manual does not
make the manufacturer liable for damages.
Read and understand the operating
instructions before using the
appliance. Familiarise with the
control elements and how to use the appliance
properly. Abide by all the safety measures stated in
the service manual. Act responsibly toward third
parties.
The operator is responsible for accidents or risks to
third parties.
Persons over 16 years of age can only workon the
appliance.An exception includes youngsters trained
in order to reachknowledge under supervision
of the trainer duringoccupational education.