Operation Manual

D
12
GB
ENGLISH
Technical Data
Hammer drill SBM 1050 E
Art. No 58113
Service connection 230 V ~ 50 Hz
Rated input 710 W
No-load speed
1
2
0-1100 min
-1
0-2800 min
-1
Drilling capacity max.
Concrete
Steel plate
Wood
13 mm
13 mm
25 mm
Drill chuck range 2 - 13 mm
Chuck neck diameter 43 mm
Weight 2,3 kg
Noise details
Sound pressure level L
pA
93 dB(A)
Sound power level L
WA
104 dB(A)
Measured according to EN 60745; Uncertainty K =
3 dB (A)
Wear ear protectors!
Vibration details
Vibration total values (triaxial vector sum) deter-
mined according to EN 60745:
Drilling into metal: Vibration emissi
-
on value a
h,D
5,5 m/s²
Impact drilling into concrete: Vibra
-
tion emission value a
h,ID
10,6 m/s²
Uncertainty K = 1,5 m/s
2
WARNING: The vibration emission level will vary
because of the ways in which a power tool can be
used and may increase above the level given in this
information sheet.
The vibration emission level may be used to compare
one tool with another.
It may be used for a preliminary assessment of
exposure.
An accurate estimate of the vibratory load
shouldalso take into account the times when the
tool isshut down or when it is running but not
actually inuse. This may signicantly reduce the
vibratoryload over the total working period.
Identify additional safety measures to protect
theoperator from the eects of vibration such
as:maintain the tool and the accessories, keep
thehands warm, organisation of work patterns.
Read and understand the operating
instructions before using the
appliance. Familiarise with the
control elements and how to use the appliance
properly. Abide by all the safety measures stated in
the service manual. Act responsibly toward third
parties.
The operator is responsible for accidents or risks to
third parties.
Persons over 16 years of age can only workon the
appliance.An exception includes youngsters trained
in order to reachknowledge under supervision
of the trainer duringoccupational education.
In case of any doubts about connection and operati
-
on refer please to our customer center
Specied Conditions Of Use
The percussion drill can be universally used for dril-
ling and percussion drilling.
Do not use this product in any other way as stated
for normal use. Not observing general regulations
in force and instructions from this manual does not
make the manufacturer liable for damages.
Emergency procedure
Conduct a rst-aid procedure adequate to the injury
and summon qualied medical attendance as quickly
as possible. Protect the injured person from further
harm and calm them down. If you seek help,state the
following pieces ofinformation: 1. Accident site, 2.
Accident type, 3. Number of injured persons, 4. Injury
type(s)
Symbols
WARNING/CAUTION!
WARNING - Read the operating instruc-
tions to reduce the risk of injury.
Wear eye protective goggles !
Wear ear protectors!
Unplug the machine before any work
on it.
Class II tool.
CE marking
Any damaged or disposed electric or
electronic devices must be delivered to
appropriate collection centres.