Operation Manual

5.8 Straps Assembly

Structural Group 8 Delivered parts and

accessories

Fig. 15

Fig. 1 – pos. 9

5.9 Fuel Information

Refuelling:

For air-cooled 2-stroke engines, mix unleaded petrol well with a branded oil at a ratio of 1:25. Meaning that

0.2 litre oil has to be added in 5 litres of petrol. .

Tip: Always prepare 1 litre of the mix at a time because the mix turns unusable after prolonged storage. .

5.10 Initial Operation Safety Instructions

Abb. 15

Warning:

Before any activity check attachment of

adapters to the engine unit.

1. Push the adapter into the engine unit until

the latch pin snaps in. (Fig. 1)

2. Press and tightly screw the covering flap.

(Fig. 2 + 3)

Check again proper attachment of

the adapters.

Warning ! Before putting the set in operation, check it to see tthat the condition is safe with regard to

operation. Do not switch the machine on, if in doubt !

Keep a watch on the points shown below:

• Cirrect assembly iof integrated tools .

• Easy run of all the switches

• Safe installation of the ignition plug . When the plug is loose, sparkles may be generated and the flowing

mix of fuel and air may get ignited.

• Make sure that the handle is clean to conduct the set safely. Before starting the machine, all the safety

and protection devices have to be fitted correctly at places. .

All the integrated tools must run freely .